Abstract:The corrosion mechanism and characteristics of steel in typical atmospheric environments directly affect the rationality of corrosion protection methods. This study investigates the corrosion evolution law of Q235 steel that has been exposed to the urban industrial atmosphere for seven years. The mass loss is used for corrosion dynamics analysis. The rust layers have been characterized by SEM, EDS, and XRD. Finally, the corrosion mechanism was analyzed through a combination of electrochemical methods, corrosion kinetics, and rust layer characteristics. The mass loss results indicate that a two-stage corrosion power function law can still effectively describe the corrosion rate of a seven-year exposure that complies with the power function law. The short-term corrosion results fail to fully reflect the corrosion performance of Q235 steel. The typical morphological structures of γ-FeOOH and α-FeOOH are identified, and the rust layers change from a loose and flat form to a granular and, finally, compact into a smooth surface. The crystalline phases of the rust layers include α-FeOOH, γ-FeOOH, Fe3O4/γ-Fe2O3 and α-Fe2O3. Corrosion products in the initial period are mainly γ-FeOOH, followed by α-FeOOH, and a small amount of Fe3O4/γ-Fe2O3. With the increase in exposure time, α-FeOOH and Fe3O4/γ-Fe2O3 in the rust layer increase. SO2 and Fe3O4/γ-Fe2O3 are the primary factors accelerating steel corrosion. During the first three years of atmospheric corrosion, the primary corrosion mechanism was governed by the acid cycle reaction mechanism. However, from the fifth year of atmospheric corrosion, oxygen-absorbing corrosion began to gradually dominate, specifically oxygen-absorbing corrosion.

Effect of ultraviolet light on the corrosion behavior of weathering steel in simulated marine atmospheric environment

Influence of Ultraviolet Light and Alternating Wet-Dry Environments on the Corrosion Behavior of Weathering Steels

The effect of temperature and UV irradiation on corrosion behavior of 304 stainless steel exposed to a simulated marine atmosphere

The Effect of Ultraviolet Wavelength on Corrosion Behavior of 7075 Aluminum Alloy in the Marine Atmospheric Environment

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Corrosion behavior of weathering steel in marine atmosphere

Photo-Corrosion of Different Metals during Long-Term Exposure to Ultraviolet Light

Corrosion behavior of the low alloy weathering steels coupled with stainless steel in simulated open atmosphere

Role of Inclusion and Microstructure on Corrosion Initiation and Propagation of Weathering Steels in Marine Environment

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Effects of pearlite on corrosion initiation and propagation in weathering steels in marine environments

Atmospheric Corrosion Behaviour of Pure Al 1060 in Tropical Marine Environment

Effect of Tropical Marine Atmospheric Environment on Corrosion Behaviour of the 7B04-T74 Aluminium Alloy

Effects of Environmental Factors on Corrosion Behavior of E690 Steel in Simulated Marine Environment

Effect of ultraviolet illumination on corrosion resistance of 304 austenitic stainless steel in molybdate-containing solution

Synergistic effects of Ultraviolet radiation and corrosion on Zr alloys

Effect of static elastic stress on the corrosion behavior of 7A04 aluminum alloy exposed to real marine atmospheric environment

Study on corrosion behavior of 40Cr steel in 3.5% NaCl solution under the synergistic effect of UV illumination and strain

Effect of corrosion on the fatigue damage behavior of M50 steel treated by ultrasonic surface rolling process

Fundamental understanding on the effect of Cr on corrosion resistance of weathering steel in simulated tropical marine atmosphere

Corrosion Behavior of 700L Automotive Beam Steel in Marine Atmospheric Environment