Abstract:Due to the small neutron absorption cross section and excellent thermal creep performance, zirconium alloy is one of the most important cladding materials for fuel rods in commercial fission reactors. However, quantitative analysis of the effects of temperature and grain boundaries on the corrosion microstructure evolution of zirconium alloys is still needed. The establishing of a phase field simulation for the corrosion process of polycrystalline zirconium alloy and the systematical investigating of the thermodynamic influence are both very important. In this study, the phase field model of the corrosion process in zirconium alloys is developed by combining corrosion electrochemistry through calculating the interfacial energy at the metal-oxide and oxide-fluid boundaries. Then the model is used to investigate the uniform corrosion behavior on the surface of Zr-2.5Sn alloy, which demonstrates that the corrosion kinetic curve follows a cubic rule. Subsequently, the influence of temperature on the corrosion thickening curve of zirconium alloy is examined, and good agreement between simulation and experimental results is achieved. It is observed that during early stage of oxide layer formation, there is a high growth rate with minimal temperature dependence; however, as the oxide layer thickness increases, temperature becomes a significant factor affecting its growth rate, with higher temperatures resulting in faster corrosion rates. Furthermore, the effect of polycrystalline zirconium alloy matrices on corrosion rate is investigated, revealing that the grain boundaries accelerate oxide layer thickening due to enhanced oxygen diffusion rates. At metal-oxide interface, O2- bands are formed in areas with higher O2- concentration along these grain boundaries towards the metal matrix, which mainly influences oxidationcorrosion rate during the initial oxidation stage.

Synergistic effects of Ultraviolet radiation and corrosion on Zr alloys

Enhanced pitting corrosion resistance of a Zr-based metallic glass by ultraviolet light irradiation

Investigating Zirconium Alloy Corrosion with Advanced Experimental Techniques: A Review

On Corrosion of Zirconium Alloy in Dissolved Oxygen Water：The Role of Cu Addition

On corrosion of zirconium alloy in dissolved oxygen water: The role of Cu addition

Understanding the fretting corrosion mechanism of zirconium alloy exposed to high temperature high pressure water

Nano-porosity effects on corrosion rate of Zr alloys using nanoscale microscopy coupled to machine learning

3D reconstruction and interconnectivity quantification of the nano-porosity in the oxide layer of corroded Zr alloys

Effect of ultrasonic surface rolling process on the microstructure and corrosion behavior of zirconium alloy in high-temperature water condition

Corrosion behaviors of Zr-Sn-Nb alloys: Influence of different concentration dissolved oxygen environment and trace V element on the anti-corrosion properties

From Microstructural Changes to Electrochemical Behavior: Decoding the Corrosion Mechanism in Zr-Sn-Nb-Fe-Cr-Mo-O-V Alloys

Effect of Zirconium Content on the Microstructure and Corrosion Behavior of As-Cast Ti-Al-Nb-Zr-Mo Alloy

Microstructure and high-temperature oxidation behaviour of anti-oxidation coating on zirconium alloys: An overview

Phase-field Simulation of High-Temperature Corrosion of Binary Zr-2.5Sn Alloy

Influence of Zn on Oxide Films on Alloy 690 in Borated and Lithiated High Temperature Water

Enhanced Weathering and Corrosion Resistance of Eu-Doped ZnO Solid Solution Material by Fluorescence Modification

Synergistic effect of Zr addition and grain refinement on corrosion resistance and pitting corrosion behavior of single α-phase Ti-Zr-based alloys

Effect of Micro-Arc Oxidation on Fretting Wear Behavior of Zirconium Alloy Exposed to High Temperature Water

How solute atoms control aqueous corrosion of Al-alloys

Degradation and Structure Evolution in Corrosive LiOH Solution of Microarc Oxidation Coated Zircaloy-4 Alloy in Silicate and Phosphate Electrolytes

Effects of Alloying Elements on Hydrogen Adsorption Properties on Zirconium Surface