Abstract:Due to the small neutron absorption cross section and excellent thermal creep performance, zirconium alloy is one of the most important cladding materials for fuel rods in commercial fission reactors. However, quantitative analysis of the effects of temperature and grain boundaries on the corrosion microstructure evolution of zirconium alloys is still needed. The establishing of a phase field simulation for the corrosion process of polycrystalline zirconium alloy and the systematical investigating of the thermodynamic influence are both very important. In this study, the phase field model of the corrosion process in zirconium alloys is developed by combining corrosion electrochemistry through calculating the interfacial energy at the metal-oxide and oxide-fluid boundaries. Then the model is used to investigate the uniform corrosion behavior on the surface of Zr-2.5Sn alloy, which demonstrates that the corrosion kinetic curve follows a cubic rule. Subsequently, the influence of temperature on the corrosion thickening curve of zirconium alloy is examined, and good agreement between simulation and experimental results is achieved. It is observed that during early stage of oxide layer formation, there is a high growth rate with minimal temperature dependence; however, as the oxide layer thickness increases, temperature becomes a significant factor affecting its growth rate, with higher temperatures resulting in faster corrosion rates. Furthermore, the effect of polycrystalline zirconium alloy matrices on corrosion rate is investigated, revealing that the grain boundaries accelerate oxide layer thickening due to enhanced oxygen diffusion rates. At metal-oxide interface, O2- bands are formed in areas with higher O2- concentration along these grain boundaries towards the metal matrix, which mainly influences oxidationcorrosion rate during the initial oxidation stage.

Mechanisms Investigation of Cathodic-Anodic Coupling Reaction of Zr-H2O at 360 °C by Long-Term In-Situ Electrochemical Polarization Analyses

The role of hydrogen in zirconium alloy corrosion

High-throughput Computing for Hydrogen Transport Properties in Ε-Zrh2

Electrochemical Behavior and Self-Sealing Ability of Zirconium Conversion Coating Applied on Aluminum Alloy 3005 in 0.5 M NaCl Solution

In-situ electrochemical impedance spectroscopy investigations on the early stage corrosion behavior of Zircaloy-4 in high-temperature lithiated water

Electrochemical Corrosion Behavior of Biomedical Ti–22Nb and Ti–22Nb–6Zr Alloys in Saline Medium

Revealing the role of hydrogen content on the mechanical behavior and cracking mechanisms of Zircaloy-4 under strain

Research on the Existence and Stability of Interfacial Tetragonal Zirconia Formed on Zirconium Alloys

Hydrogen Permeation Characteristic of Nanoscale Passive Films Formed on Different Zirconium Alloys

Fretting corrosion behavior and microstructure evolution of hydrided zirconium alloy under gross slip regime in high temperature high pressure water environment

Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy

Initiation and propagation of pitting and crevice corrosion of hydrogen-containing passive films on X70 micro-alloyed steel

Corrosion of Zirconium Alloys Used for Nuclear Fuel Cladding

Continuum model for hydrogen pickup in Zirconium alloys of LWR fuel cladding

Synergistic effects of Ultraviolet radiation and corrosion on Zr alloys

Phase-field Simulation of High-Temperature Corrosion of Binary Zr-2.5Sn Alloy

Investigating Zirconium Alloy Corrosion with Advanced Experimental Techniques: A Review

Effects of Alloying Elements on Hydrogen Adsorption Properties on Zirconium Surface

Effect of Hydrogen Uptake on the Electrochemical Corrosion of N18 Zircaloy under Gamma Irradiation

Microstructural evolution and corrosion behavior of constituent particles of 2024-T3 Al alloy during zirconium conversion coating

Corrosion Behavior of High-Strength Low-Alloy Steel in High-Temperature Water with Zinc and Aluminum Simultaneous Injection