Abstract:In this work, hydrogen charged Zircaloy-4 has been investigated under an in-situ electron backscatter diffraction during tensile loading. Aim were, first, to distinguish the hydride phase type and its spatial distribution, second to determine hydride phase transformation (HPT) and orientation relationship (OR) subjected to uniaxial tensile condition, and third to correlate the hydrides evolution and their effect on the micromechanical behavior, such as slip mode activation and lattice rotation, of Zircaloy-4. Apart from the applied stress, the analysis reveals that hydride reorientation is strongly related to temperature and loading mode. We noted that deformation induced δ-ZrH 1.5 transformed to γ-ZrH and ε-ZrH 2 , and the former follows the confirmed OR {0001} α //{111} δ/γ with α // δ/γ , while the latter's OR changed to {10 0} α //{121} ε with α // ε after HPT. The coexistence of δ-ZrH 1.5 and γ-ZrH or ε-ZrH 2 is observed, and the main corresponding OR is {111} δ //{111} γ with δ // γ , and {100} δ //{110} ε with δ // ε , respectively. The characterized microstructure and the measured lattice rotation results indicate that HPT delayed cracking in hydride and promoted deformation in parent grains. As the strain increases, the maintenance of hydride-matrix (H-M) coherent interfaces restricts further lattice rotation. HPT accelerates the hydride decomposition ascribed to the intensification of hydrogen diffusion under stress, and the hydride and the H-M interfaces act as priority sites for initiating microcracks. The sequence of HPT depends on the possibility of activated slip mode among grains. These findings contribute to developing the understanding of the HPT and hydrogen embrittlement.

In-situ electrochemical impedance spectroscopy investigations on the early stage corrosion behavior of Zircaloy-4 in high-temperature lithiated water

Mechanisms Investigation of Cathodic-Anodic Coupling Reaction of Zr-H2O at 360 °C by Long-Term In-Situ Electrochemical Polarization Analyses

Electrochemical impedance spectroscopy during corrosion process of 8090 Al-Li alloy in EXCO solution

Effect of Laser Surface Treatment on the Corrosion Resistance of Zircaloy-4 at High Temperature

Study of Oxidation Behavior and Associated Microstructure Evolution of Zircaloy-4 Exposed to High Temperature Pure Steam

Electrochemical Behavior of ZE41 Magnesium Alloy under Simulated Atmospheric Corrosion

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Understanding the Corrosion Behavior of the AZ91D Alloy in Simulated Body Fluid through the Use of Dynamic EIS

Study on Corrosion Resistance of N36 Zirconium Alloy in LiOH Aqueous Solution

Effect of Hydrogen Uptake on the Electrochemical Corrosion of N18 Zircaloy under Gamma Irradiation

Corrosion Properties of Zircaloy-4 and M5 under Simulated PWR Water Conditions

Corrosion behavior of Cr-coated zirconium alloy cladding in LiOH/H3BO3-containing water at 360 °C

Effect of interface undulation on the high temperature oxidation behaviors of grit-blasted and coated zircaloy in pressurized water

Evolution of Microstructure, Thermophysical and Mechanical Properties and Wetting Behavior of Plasma-Sprayed Yb2O3 and Y2O3 Co-Stabilized ZrO2 Coatings During High-Temperature Exposure and CMAS Corrosion

Irradiation Damage Simulation of Zircaloy-4 Using Argon Ions Bombardment

Corrosion Behaviour of Ly12 Alloy under Thin Electrolyte Films

ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY OF Al ALLOYS DURING EXFOLIATION CORROSION

Effect of Copper Ions Implantation on Corrosion Behavior of Zircaloy-4 in 1 M H2so4

Precession electron diffraction study on the microtexture of the zirconium oxide film in aqueous solutions

Effect of Zr2+ irradiation on microstructure and corrosion behavior of 90Nb-10Zr binary alloy in 360 °C lithiated water