Abstract:The corrosion mechanism and characteristics of steel in typical atmospheric environments directly affect the rationality of corrosion protection methods. This study investigates the corrosion evolution law of Q235 steel that has been exposed to the urban industrial atmosphere for seven years. The mass loss is used for corrosion dynamics analysis. The rust layers have been characterized by SEM, EDS, and XRD. Finally, the corrosion mechanism was analyzed through a combination of electrochemical methods, corrosion kinetics, and rust layer characteristics. The mass loss results indicate that a two-stage corrosion power function law can still effectively describe the corrosion rate of a seven-year exposure that complies with the power function law. The short-term corrosion results fail to fully reflect the corrosion performance of Q235 steel. The typical morphological structures of γ-FeOOH and α-FeOOH are identified, and the rust layers change from a loose and flat form to a granular and, finally, compact into a smooth surface. The crystalline phases of the rust layers include α-FeOOH, γ-FeOOH, Fe3O4/γ-Fe2O3 and α-Fe2O3. Corrosion products in the initial period are mainly γ-FeOOH, followed by α-FeOOH, and a small amount of Fe3O4/γ-Fe2O3. With the increase in exposure time, α-FeOOH and Fe3O4/γ-Fe2O3 in the rust layer increase. SO2 and Fe3O4/γ-Fe2O3 are the primary factors accelerating steel corrosion. During the first three years of atmospheric corrosion, the primary corrosion mechanism was governed by the acid cycle reaction mechanism. However, from the fifth year of atmospheric corrosion, oxygen-absorbing corrosion began to gradually dominate, specifically oxygen-absorbing corrosion.

Corrosion behavior of the low alloy weathering steels coupled with stainless steel in simulated open atmosphere

Corrosion behavior of weathering steel in marine atmosphere

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Corrosion behavior of low-alloy steel in tidal zone: A simulated investigation

Influence of Ultraviolet Light and Alternating Wet-Dry Environments on the Corrosion Behavior of Weathering Steels

Study on corrosion performance and corrosion product composition of weathering steel and high‐performance steel in simulated C3 environment

Corrosion Behavior of a Low-Carbon Steel in Simulated Marine Splash Zone

A study on corrosion behavior of advanced weathering steel relying on Ni-Mo synergy under marine atmosphere

CORROSION BEHAVIOR OF WEATHERING STEEL IN A WET/DRY ENVIRONMENT CONTAINING MgCl2

Insights into the Corrosion Mechanism and Electrochemical Properties of the Rust Layer Evolution for Weathering Steel with Various Cl− Deposition in the Simulated Atmosphere

Investigation of the Corrosion Resistance of Weathering Steel at Different Atmospheric Environment

CORROSION BEHAVIOR OF RUSTED MILD STEEL UNDER MEANS OF WET/DRY ALTERNATE CONDITIONS

Corrosion Micro- and Macro-Electrochemical Behavior of Rusted Carbon Steel and Weathering Steel

Optimizing the corrosion performance of rust layers: role of Al and Mn in lightweight weathering steel

Coupling Effect of Hydrostatic Pressure and Erosion on Corrosion Behavior of X70 Steel in Simulated Seawater

Influence of Carbon Content on Corrosion Resistance Performance of Weathering Steel

Corrosion evolution and stress corrosion cracking behavior of a low carbon bainite steel in the marine environments: Effect of the marine zones

Fundamental understanding on the effect of Cr on corrosion resistance of weathering steel in simulated tropical marine atmosphere

Corrosion Behavior of Low-C Medium-Mn Steel in Simulated Marine Immersion and Splash Zone Environment

Corrosion Behavior of the Steel Used As a Huge Storage Tank in Seawater