Abstract:The world is struggling with a rapid increase in energy demand and the exacerbating problems of greenhouse gases (GHG) caused by the widespread exploitation of fossil fuels. These issues, however, have brought the attention of academics, investors, and governments throughout the world to hydrogen as a viable alternative during the transition from fossil resources to renewable energies. Hydrogen could be used to generate electricity using an electrochemical energy conversion device called polymer electrolyte membrane fuel cell (PEMFC), which converts the chemical energy stored in bonds of the fuel (hydrogen) directly to electric power. Although PEMFC technology has advanced significantly over the last decade, complete commercialization of this technology will still need more cost-cutting and performance enhancement [1]. From electrochemical and economic standpoints, the porous electrode is the most crucial of PEMFC components. Electrodes are porous media made up of different constituents that serve as the heart of PEMFC, facilitating different coupled transport phenomena such as heat, mass, and electric charge transfer. As a result, an optimized design of this component might significantly elevate performance and efficiency. In recent years, designing architectured electrodes with the goal of improving overall energy conversion efficiency has started [2, 3]. However, full leverage of such state-of-the-art procedures for designing engineered electrodes strongly depends on the employment of novel design tools. Among various advanced design alternatives, the attention of researchers in different disciplines of engineering has recently been drawn to topology optimization methods [4]. While topology optimization was originally applied to structural mechanics, it has since been expanded to more complicated systems with multiple physics, including heat and fluid. However, with only a few exceptions [5, 6], most topology optimization applications to electrochemical devices are limited to enhancing flow fields to boost reaction dispersion and diminish pressure drop. Moreover, previous research studies like [5] mainly used simplified two-dimensional isothermal models, which are far from reality. Therefore, these studies are incapable of providing a comprehensive insight into optimal spatial distribution of catalyst, electrolyte, and voids in a porous electrocatalyst layer. In the present study, a three-dimensional, non-isothermal, multi-phase model is developed to simulate the performance of PEMFC. The presented model is then used to determine the optimal spatial distribution of the porous electrocatalyst layer constituents, including catalyst, electrolyte, and voids. While increasing the catalyst content in the PEMFC electrode could improve cell performance, its excessive use leads to a substantial increment of cost and oxygen transport resistance. This mass transport resistance problem is especially critical at high current density regions with a higher risk of flooding. Hence, in the present study, the optimization process is formulated as a constrained problem so as to obtain maximum output voltage under a constant total catalyst loading. The results show that in an optimal design, the volume fraction of catalyst and electrolyte should be higher in the region under the channel where there is a higher potential for current density production. At the same time, it is desired to increase the porosity in the region under the rib where oxygen delivery involves more resistance. Acknowledgment This work was supported by JSPS KAKENHI Grant Number 21H04540. References [1] Olabi A. G., et al. Energy, 214 (2021): 118955. [2] Tanveer M., et al. Fuel, 298 (2021): 120818. [3] Van Dao D., et al. Int. J. Hydrogen Energ., 44.45 (2019): 24580. [4] Wu J., et al. Struct. Multidiscip. O., 63.3 (2021): 1455. [5] Lamb J. and Andrei P. ECS Transactions, 98.9 (2020): 67. [6] Beck V. A., et al. J. Power Sources, 512 (2021): 230453.

Investigation of a Cost-Effective Strategy for Polymer Electrolyte Membrane Fuel Cells: High Power Density Operation

Developing Next Generation High Performance Polymer Electrolyte Membrane Fuel Cells Using Metal Foam As Gas Diffusion Layer

Effective single web-structured electrode for high membrane electrode assembly performance in polymer electrolyte membrane fuel cell

On the optimal cathode catalyst layer for polymer electrolyte fuel cells: Bimodal pore size distributions with functionalized microstructures

Understanding and Engineering of Multiphase Transport Processes in Membrane Electrode Assembly of Proton-Exchange Membrane Fuel Cells with a Focus on the Cathode Catalyst Layer: A Review

A Numerical Approach to Optimize Catalyst Layer Structure of Polymer Electrolyte Fuel Cells Using Non-Isothermal Three-Dimensional Simulation

Effect of design and operating pressure on the performance of a polymer electrolyte membrane-based cylindrical fuel cell

Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: A three-dimensional full-scale modeling study

Ultralow Platinum Loading Proton Exchange Membrane Fuel Cells: Performance Losses and Solutions

Analysis and Optimization of Transport Losses in Hydroxide Exchange Membrane Fuel Cells

Impact of Membrane Types and Catalyst Layers Composition on Performance of Polymer Electrolyte Membrane Fuel Cells

Novel Strategy for Engineering Ultra-Thin Proton Exchange Membranes for Advanced PEM Fuel Cells

Multi-objective optimization of the cathode catalyst layer micro-composition of polymer electrolyte membrane fuel cells using a multi-scale, two-phase fuel cell model and data-driven surrogates

Designing the next generation of proton-exchange membrane fuel cells

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Optimization of a catalyst layer with a high-utilization gradient Pt distribution for polymer electrolyte membrane fuel cells

Multiple Effects of Non-Uniform Channel Width along the Cathode Flow Direction Based on a Single PEM Fuel Cell: an Experimental Investigation

Computational Fluid Dynamic Investigation of Local Flow-Field Conditions in Lab Polymer Electrolyte Membrane Fuel Cells to Identify Degradation Stressors and Performance Enhancers

Structure Design for Ultrahigh Power Density Proton Exchange Membrane Fuel Cell

Engineering nanoporous and solid core-shell architectures of low-platinum alloy catalysts for high power density PEM fuel cells

Influence and Optimization of Gas Diffusion Layer Porosity Distribution along the Flow Direction on the Performance of Proton Exchange Membrane Fuel Cells