Abstract:Incremental hole flanging (IHF) is a relatively new sheet metal forming process to produce intricate shapes without using dedicated punches and dies. The present work focuses on understanding the mechanics of the multi-stage IHF process through experimental studies and the finite element approach. The IHF experiments were performed on deep drawing quality steel sheets with a pre-cut hole diameter of 45 mm, 50 mm, 60 mm, and 70 mm. The cylindrical flanges were formed in four stages with an initial wall angle of 60° to a final angle 90° with an angle increment of 10° in each stage. The maximum and minimum hole expansion ratio was found to be 2.06 and 1.17 respectively. The fracture was observed in a blank of 45 mm pre-cut hole diameter in the third stage at 40 mm depth. The fracture forming limit diagram (FFLD) was determined from incrementally formed varying wall angle conical and pyramidal frustums. Consequently, six different ductile damage models incorporating Hill48 anisotropy plastic theory were successfully calibrated. The Ayyada model showed good agreement with experimental FFLD as compared to all other models. The fracture limit determined experimentally and using the Ayyada model was implemented in the finite element simulation of the IHF process to predict the formability in terms of in-plane strain distribution, forming forces, and thickness distribution. The predicted results matched accurately with the experimental data within a 6% error for all investigated conditions. Noticeably, the strain path in IHF had three deformation modes viz. plane strain, bi-axial stretching, and uni-axial tension, which was comprehended using texture analyses. Finally, irrespective of the initial pre-cut hole diameter, the surface roughness was found to decrease with the number of stages of the IHF process.

Dieless Double-Sided Incremental Hole-Flanging With Different Toolpath Strategies

Investigation on A New Hole-Flanging Approach by Incremental Sheet Forming Through A Featured Tool

Global-cumulative Incremental Hole-Flanging by Tools with Complementary-Shape Cross Section

Experimental investigations on the forming mechanism of a new incremental stretch-flanging strategy with a featured tool

An incremental flanging strategy for small hole with electropermanent magnetic device

Deformation Mechanics and Failure Mode in Stretch and Shrink Flanging by Double-Sided Incremental Forming

Effective Forming Strategy for Double-Sided Incremental Forming Considering In-Plane Curvature and Tool Direction

Toolpath strategy study for improving geometric accuracy of large-size open-edge flanged parts in robot-assisted incremental flanging

Investigations on a Novel Double-Surface Single Point Incremental Forming Process for Sharp-Corner Features

Application of incremental forming in manufacturing of complicated thin-walled workpiece

Optimization on outer edge flanging path for 1060 aluminum sheet in two-pass incremental forming

Experimental and Finite Element Investigation of Over-Bending Phenomenon in Double-Sided Incremental Forming (DSIF) of Aluminium Sheets

Research on Toolpath Optimization of Robot-Assisted Incremental Flanging

Investigation of Material Deformation Mechanism in Double Side Incremental Sheet Forming

A new forming limit test method for incremental stretch flanging

A Novel Multi-Step Strategy of Single Point Incremental Forming for High Wall Angle Shape

Effect of pre-cut hole diameter on deformation mechanics in multi-stage incremental hole flanging of deep drawing quality steel

Feature-based Tool Path Generation Approach for Incremental Sheet Forming Process

A New Tool Path with Point Contact and Its Effect on Incremental Sheet Forming Process

Research on Sheet Metal Digital Incremental Forming Technology without Support

Multi-step Toolpath Approach of Improving the Dimensional Accuracy of a Non-Axisymmetric Part in Incremental Sheet Forming and Its Mechanism Analysis