Abstract:Single point incremental forming (SPIF) is a die-less manufacturing technology using a numerical controlling system for complex and customized parts. However, single-step SPIF cannot achieve high wall angle shapes due to the formability limit of the material. As wall angle gets larger, local thinning becomes severe, and cracking occurs easily. Generally, a multi-step strategy is used to get a hard-to-form deep drawing shape. However, inappropriate multi-step strategies can cause a stepped feature (corrugation). In this study, a novel parameterized multi-step strategy is proposed to solve the local thinning and stepped feature issues of forming high wall angle shape. Both experimental and simulation results showed this strategy not only improves the formability of a high wall angle, by avoiding over-thinning in the local region and redistributing the thickness of the material, but also minimizes geometric deviation by stepped feature. The multi-step strategy made the local thickness increase from 0.47 mm to 0.68 mm, preventing both cracking observed in a single-step strategy and the occurrence of the stepped feature. With the good agreement between experimental and simulation results, simulations with different parameters in a parameterized multi-step strategy were carried out to compare thickness distribution at each step, the stepped feature at the bottom and the ductile failure tendency. The comparison reveals that the locally large plastic strain, which was caused by the mismatch between the tool radius and vertical displacement, is the main reason for uneven thickness distribution, obvious stepped feature, and high failure tendency. With appropriate parameters, a multi-step strategy results in a more uniform thickness distribution, higher geometric accuracy, and lower failure tendency.

Multi-step Toolpath Approach of Improving the Dimensional Accuracy of a Non-Axisymmetric Part in Incremental Sheet Forming and Its Mechanism Analysis

Reduction of Geometric Deviation by Multi-Pass Incremental Forming Combined with Tool Path Compensation for Non-Axisymmetric Aluminum Alloy Component with Stepped Feature

Feature-based Tool Path Generation Approach for Incremental Sheet Forming Process

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Strategies to improve the geometric accuracy in asymmetric single point incremental forming

A New Tool Path with Point Contact and Its Effect on Incremental Sheet Forming Process

A Novel Multi-Step Strategy of Single Point Incremental Forming for High Wall Angle Shape

Investigations on a novel quadratic spiral tool path and its effect on incremental sheet forming process

Experimental and numerical investigation of novel toolpaths on forming quality in DSIF

Investigations on a Novel Double-Surface Single Point Incremental Forming Process for Sharp-Corner Features

Effective Forming Strategy for Double-Sided Incremental Forming Considering In-Plane Curvature and Tool Direction

An Efficient Method for Thickness Prediction in Multi-Pass Incremental Sheet Forming

Analytical prediction of stepped feature generation in multi-pass single point incremental forming

Numerical Modelling for Efficient Analysis of Large Size Multi-Stage Incremental Sheet Forming

Experimental and Finite Element Investigation of Over-Bending Phenomenon in Double-Sided Incremental Forming (DSIF) of Aluminium Sheets

Investigations on the deformation mechanism of a novel three-sheet incremental forming

Tool path correction algorithm for single-point incremental forming of sheet metal

Some improvements on the one-step inverse isogeometric analysis by proposing a multi-step inverse isogeometric methodology in sheet metal stamping processes

Investigation of Material Deformation Mechanism in Double Side Incremental Sheet Forming

Tool Path Design of the Counter Single Point Incremental Forming Process to Decrease Shape Error

Geometric Deviation During Incremental Sheet Forming Process: Analytical Modeling and Experiment