Abstract:Single point incremental forming (SPIF) is a die-less manufacturing technology using a numerical controlling system for complex and customized parts. However, single-step SPIF cannot achieve high wall angle shapes due to the formability limit of the material. As wall angle gets larger, local thinning becomes severe, and cracking occurs easily. Generally, a multi-step strategy is used to get a hard-to-form deep drawing shape. However, inappropriate multi-step strategies can cause a stepped feature (corrugation). In this study, a novel parameterized multi-step strategy is proposed to solve the local thinning and stepped feature issues of forming high wall angle shape. Both experimental and simulation results showed this strategy not only improves the formability of a high wall angle, by avoiding over-thinning in the local region and redistributing the thickness of the material, but also minimizes geometric deviation by stepped feature. The multi-step strategy made the local thickness increase from 0.47 mm to 0.68 mm, preventing both cracking observed in a single-step strategy and the occurrence of the stepped feature. With the good agreement between experimental and simulation results, simulations with different parameters in a parameterized multi-step strategy were carried out to compare thickness distribution at each step, the stepped feature at the bottom and the ductile failure tendency. The comparison reveals that the locally large plastic strain, which was caused by the mismatch between the tool radius and vertical displacement, is the main reason for uneven thickness distribution, obvious stepped feature, and high failure tendency. With appropriate parameters, a multi-step strategy results in a more uniform thickness distribution, higher geometric accuracy, and lower failure tendency.

Strategies to improve the geometric accuracy in asymmetric single point incremental forming

Reduction of Geometric Deviation by Multi-Pass Incremental Forming Combined with Tool Path Compensation for Non-Axisymmetric Aluminum Alloy Component with Stepped Feature

Multi-step Toolpath Approach of Improving the Dimensional Accuracy of a Non-Axisymmetric Part in Incremental Sheet Forming and Its Mechanism Analysis

Effective Forming Strategy for Double-Sided Incremental Forming Considering In-Plane Curvature and Tool Direction

Geometric Deviation During Incremental Sheet Forming Process: Analytical Modeling and Experiment

Investigations on a Novel Double-Surface Single Point Incremental Forming Process for Sharp-Corner Features

Improving the Accuracy of Double-Sided Incremental Forming Simulations by Considering Kinematic Hardening and Machine Compliance

Tool Path Design of the Counter Single Point Incremental Forming Process to Decrease Shape Error

A Novel Multi-Step Strategy of Single Point Incremental Forming for High Wall Angle Shape

A New Tool Path with Point Contact and Its Effect on Incremental Sheet Forming Process

Thickness Control in A New Flexible Hybrid Incremental Sheet Forming Process

Feature-based Tool Path Generation Approach for Incremental Sheet Forming Process

Change in geometry size and thinning rate in single-point incremental forming process of TA1 sheet: evaluation method and finite element analysis

Research on Sheet Metal Digital Incremental Forming Technology without Support

Analytical Modeling and Experimental Validation of the Forming Force in Several Typical Incremental Sheet Forming Processes

INFLUENCE OF TECHNOLOGICAL PARAMETERS ON MACHINING ACCURACY IN INCREMENTAL FORMING

Cranial Reconstruction Using Double Side Incremental Forming

Increasing the Formability of CP-Ti During Incremental Sheet Forming with an Auxiliary Sheet

Experimental Investigation on Friction-Stir-Assisted Incremental Forming with Synchronous Bonding of Aluminum Alloy and Steel Sheets

Developing a selective assembly technique for sheet metal assemblies

Study on Single Point Incremental Forming with the Roller Ball Tool for Increasing the Part Quality