Abstract:Metallic components with surface microfeatures are increasingly used in aerospace, automotive and other applications due to their drag-reducing properties. In this situation, we proposed a novel shape-surface integrated incremental sheet forming (S 2 -ISF) process to achieve the simultaneous fabrication of both surface microfeatures and desired geometric shape. It was found that an increase in the forming angle was most effective in improving the formation of microgroove array, followed by the step size, the spindle speed and the feed rate. Moreover, when the forming angle is constant, the step size and microgroove pitch increase linearly. Compared to the as-received sheet, the yield strength is increased by more than 20% after the S 2 -ISF process. Moreover, we observed that the increase of forming angle in the S 2 -ISF process has promoted grain deformation and grain fragmentation, which is favorable for the formed part to obtain more uniform and finer grains. The grain size distribution along the thickness direction shows the characteristics of 'coarse in the middle and fine at both ends'. Finally, we found that the formed parts with different microgroove pitch from the S 2 -ISF process have the significant enhancement on the hydrophobicity and anti-friction property. When microgroove pitch is 155.5 μm, the surface contact angle of formed part improved from 70.65° to 101.39°, and the wear volume of formed part decreases from 4.89 × 10 −3 mm 3 to 3.65 × 10 −3 mm 3 . This work provides a solution for the efficient and economical fabrication of three-dimensional thin-walled parts with microgroove array to enhance surface functionality.

Application of incremental forming in manufacturing of complicated thin-walled workpiece

Thickness Control in A New Flexible Hybrid Incremental Sheet Forming Process

Dieless Double-Sided Incremental Hole-Flanging With Different Toolpath Strategies

Investigation on A New Hole-Flanging Approach by Incremental Sheet Forming Through A Featured Tool

Experimental investigations on the forming mechanism of a new incremental stretch-flanging strategy with a featured tool

Recent Development of Incremental Forming

Investigations on a Novel Double-Surface Single Point Incremental Forming Process for Sharp-Corner Features

Feature-based Tool Path Generation Approach for Incremental Sheet Forming Process

Reduction of Geometric Deviation by Multi-Pass Incremental Forming Combined with Tool Path Compensation for Non-Axisymmetric Aluminum Alloy Component with Stepped Feature

Investigation on Automotive Fender Fabrication Combining Stretch Forming and Incremental Forming

State of the Art in Incremental Forming: Process Variants, Tooling, Industrial Applications for Complex Part Manufacturing and Sustainability of the Process

An incremental flanging strategy for small hole with electropermanent magnetic device

Research on Sheet Metal Digital Incremental Forming Technology without Support

A New Tool Path with Point Contact and Its Effect on Incremental Sheet Forming Process

Optimization on outer edge flanging path for 1060 aluminum sheet in two-pass incremental forming

Global-cumulative Incremental Hole-Flanging by Tools with Complementary-Shape Cross Section

Microstructure Refinement by Tool Rotation-Induced Vibration in Incremental Sheet Forming

Inverse finite element approach and its application in sheet metal forming

Effective Forming Strategy for Double-Sided Incremental Forming Considering In-Plane Curvature and Tool Direction

Forming mechanism of a novel shape-surface integrated incremental sheet forming process for fabricating parts with enhanced surface functionality

A Hybrid Flexible Sheet Forming Approach towards Uniform Thickness Distribution