Abstract:A novel design of the 532 nm Rayleigh–Mie Doppler lidar receiving system is carried out. The use of polarization isolation technology to effectively improve the receiving system optical reception efficiency, suppress the background noise, not only improves the system wind field detection accuracy, while achieving a high-accuracy temperature measurement. The wind speed and temperature measurement principle of the system are discussed in detail, and the triple Fabry–Perot etalon parameters are optimized. Utilizing the overall design parameters of the system, the system detection performance is simulated. The simulation results show that from 5 to 50 km altitude with vertical resolution of 0.1 km@5 ∼ 20 km, 0.5 km@20 ∼ 40 km, 1 km@40 ∼ 50 km, by using the laser with single pulse energy of 600 mJ, repetition frequency of 50 Hz and the receiving telescope with aperture of 0.8 m, with 2min integration time and in ± 50 m/s radial wind speed range, the radial wind speed measurement accuracies of our designed lidar in the day and night are better than 2.6 m/s and 0.9 m/s respectively, and its performance is obviously superior to that of traditional system 5.6 m/s and 1.4 m/s wind speed accuracies; with 10min integration time and in 210 ∼ 280 K temperature range, the temperature measurement accuracies of the system in the day and night are better than 3.4 K and 1.2 K respectively; since the wind speed sensitivities of the Mie and Rayleigh scattering signals are not exactly the same, in ± 50 m/s radial wind speed range, the wind speed bias induced by Mie signal is less than 1 m/s in the temperature range of 210–290 K and in the backscatter ratio range of 1–1.5 for pair measurement.

Simulation Study On Detection Performance Of Eye-Safe Coherent Doppler Wind Lidar Operating Near 1.6 Mu M

Multi-Longitudinal-Mode High-Spectral-Resolution Lidar

1.55Μm All-Fiber Coherent Doppler Lidar for Wind Measurement

Numerical Simulation of 1.55 um Coherent Lidar for Wind Measurement

Enhanced Wind-Field Detection Using an Adaptive Noise-Reduction Peak-Retrieval (ANRPR) Algorithm for Coherent Doppler Lidar

Pulse Accumulation Approach Based on Signal Phase Estimation for Doppler Wind Lidar

Performance analysis of dual-frequency lidar in the detection of the complex wind field

Doppler Wind Lidar From UV to NIR: A Review With Case Study Examples

Performance of Continuous-wave Coherent Doppler Lidar for Wind Measurement

1.55-Μm Pulse Coherent LIDAR with 10-Km Detection Range

A novel wind ladar system based on 1.55 mu m All-fiber Coherent

Research on optimizing the optical local-oscillator power of Coherent Doppler LiDAR to enhance wind velocity measurements

Detection of Doppler Signal of Moving Target Using 1.06 μm Coherent Detection Lidar

Performance validation for wind measurement with multi-longitudinal mode double-edge detection

Investigation on single-particle detection of continuous-waves coherent Doppler lidar: theoretical feasibility and performance comparison with multiple-particle detection state

Design and performance simulation of 532 nm Rayleigh–Mie Doppler lidar system for 5–50 km wind measurement

Analysis on wind retrieval methods for Rayleigh Doppler lidar

Detection Performance Analysis of Marine Wind by Lidar and Radar under All-Weather Conditions

Coherent Doppler wind lidar signal denoising adopting variational mode decomposition based on honey badger algorithm

Theoretical performance of a 1.5-μm satellite-borne coherent Doppler wind lidar using a planar waveguide optical amplifier with a demonstrated figure of merit: simulation of signal detection probability, measurement precision, and bias

Mid-altitude wind measurements with mobile Rayleigh Doppler lidar incorporating system-level optical frequency control method