Abstract:An architecture for a UV wind lidar dedicated to measuring vertical and lateral wind in front of an aircraft for gust load alleviation is presented. To optimize performance and robustness, it includes a fiber laser architecture and a Quadri Mach-Zehnder (QMZ) interferometer with a robust design to spectrally analyze the backscattered light. Different lidar parameters have been selected to minimize the standard deviation of wind speed measurement projected onto the laser axis, calculated through end-to-end simulations of the instrument. The optimization involves selecting an emission/reception telescope to maximize the amount of collected photons backscattered between 100 m and 300 m, a background filter to reduce noise from the scene, and photo-multiplier tubes (PMT) to minimize detection noise. Simulations were performed to evaluate lidar performance as a function of laser parameters. This study led to the selection of three laser architectures: a commercial solid-state laser, a design of a fiber laser, and a hybrid fiber laser resulting in standard deviations of 0.18 m/s, 0.17 m/s, and 0.09 m/s, respectively, at 10 km of altitude. To reconstruct the vertical and lateral wind on the flight path, the lidar is addressed to four different directions to measure four different projections of the wind. We calculate analytically (and validate through simulations) the addressing angle with respect to the flight direction that minimizes the root mean squared error (RMSE) between the reconstructed vertical and lateral wind components and the actual ones, assuming turbulence that follows the Von Karman turbulence model. We found that the optimum angle for an estimation at 100 m is about 50°, resulting in an improvement of about 50 % compared to an angle of 15°–20° typically used in current studies.

Doppler Wind Lidar From UV to NIR: A Review With Case Study Examples

Multi-Longitudinal-Mode High-Spectral-Resolution Lidar

Field-widened Michelson Interferometer for Spectral Discrimination in High-Spectral-resolution Lidar: Theoretical Framework.

Development of Direct-Detection Doppler Wind Lidar for Vertical Atmospheric Motion

Generalized High-Spectral-resolution Lidar Technique with a Multimode Laser for Aerosol Remote Sensing.

Polarized High-Spectral-Resolution Lidar Based on Field-Widened Michelson Interferometer

Aeronautics Application of Direct-Detection Doppler Wind Lidar: An Adapted Design Based on a Fringe-Imaging Michelson Interferometer as Spectral Analyzer

Advancements in Tunable Diode Laser Absorption Spectroscopy for Hypersonic Wind Tunnel Testing

Doppler Wind Lidar Based on Fabry-Perot Etalon

Performance analysis of dual-frequency lidar in the detection of the complex wind field

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere

1.55Μm All-Fiber Coherent Doppler Lidar for Wind Measurement

Evaluation and Wind Field Detection of Airborne Doppler Wind Lidar with Automatic Intelligent Processing in North China

Ultraviolet high-spectral-resolution Doppler lidar for measuring wind field and aerosol optical properties

Optimization of a direct detection UV wind lidar architecture for 3D wind reconstruction at high altitude

Analysis on wind retrieval methods for Rayleigh Doppler lidar

Coherent Doppler wind lidar signal denoising adopting variational mode decomposition based on honey badger algorithm

Wind velocity retrieval and field widening techniques of fringe-imaging Mach-Zehnder interferometer for Doppler lidar

Micro-pulse upconversion Doppler lidar for wind and visibility detection in the atmospheric boundary layer

Design and performance simulation of 532 nm Rayleigh–Mie Doppler lidar system for 5–50 km wind measurement

Direct Detection Doppler Wind Lidar Based on Dual FP Etalon