Detection of Doppler Signal of Moving Target Using 1.06 μm Coherent Detection Lidar

Yang Suhui
Abstract:The demo system using 1.06 μm coherent detection lidar for velocity measurement was introduced.One approach is to inject the laser of monolithic non-planar unidirectional ring laser into a high power Q-switch Nd:YAG laser to obtain pulsed and single-longitudinal-mode laser,simultaneity,to lock the frequency of the Q-switched laser to the master oscillator.Single frequency pulse laser with output power higher than 5 mJ was obtained,and pulse width was 40 ns.The Q-switched laser was used in a heterodyne system to measure the velocity of a turning object.The speed of moving target was observed by the ways of heterodyne detection which measured the Doppler information of moving target.The moving target was a dial whose rotate speed could be modulated between 0~60 Hz.The diameter of dial was 10 cm.The signals would be received by high speed photodiodes whose bandwidth was 3.5GHz,and being sampled at the rate of 2.5 GS/s.The Doppler shift causing by moving target can be measured by the processing system based on LabVIEW.The comparative error of the velocity measurement was less than 3%.The error in the velocity measurement was analyzed in bandwidth of output laser and precision of system.The demo system provides a good repetition in velocity measurement.
Physics,Engineering
What problem does this paper attempt to address?