Abstract:In order to improve the scanning efficiency of lidar, a set of high precision scanning system with 40 × 40 sub-beams is established, in which a liquid crystal optical phased array is used to load the phase calculated by Gerchberg–Saxton(GS) algorithm to split the incident plane wave. Technically, the imperfections of GS algorithm often lead to problems such as sidelobes and uneven intensity of output spots, which eventually result in poor pointing accuracy of sub-beams and low scanning resolution of lidar. To solve those problems, we propose an optical method rather than the classical algorithm optimization methods, which restricts the preset sub-beams to the diffraction limit to unify the actual sub-spot morphology and ensure high pointing accuracy. In this way, the standard deviation of pointing error eventually decreases from 42 μ rad to 16 μ rad. In the aspect of eliminating zero-order leakage, the zero-order light leakage cannot be separated by the conventional tilt method in the case that the spatial spectrum span of the generated beam array exceeds the cut-off frequency. Concerning this issue, a novel zero-order leakage elimination method is proposed to avoid zero-order leakage by splicing two half beam array of adjacent diffraction orders on both sides of the cut-off frequency. Meanwhile, the intensity correction is carried out to achieve leakage avoidance without damaging the intensity uniformity of the beam array.

Optical System for Scanning Angle Amplification in Tunable Laser Based All-Solid Lidar

A Hybrid Solid-State Beam Scanner for LiDAR Applications

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Solid-state Lidar with wide steering angle using counter-propagating beams

Solid-State Photonics-Based Lidar With Large Beam-Steering Angle by Seamlessly Merging Two Orthogonally Polarized Beams

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

SOA-Integrated Widely Tunable Laser Array for All-Solid Lidar Application

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

A Low-Cost High-Resolution Solid-State Lidar With Wavelength Division Multiplexed Components and Interleaved Orthogonal Polarization Grating Couplers

High-Speed Two-Dimensional Spectral-Scanning Coherent LiDAR System Based on Tunable VCSEL

Simultaneous Enhancement of Viewing Angle and Angular Resolution of Integrated Lidar With Bidirectional Signals and Orthogonal Polarizations

Solid-state FMCW LiDAR with in-fiber beam scanner

Spectrally Scanning LiDAR Based on Wide-Angle Agile Diffractive Beam Steering

Beam-Steering Based on Dispersive Optical Phased Array for FMCW LiDAR Application

Compact Solid-state Coherent LiDAR Based on In-fiber Beam Scanner

Design Study of a Large-Angle Optical Scanning System for MEMS LIDAR

Tunable V-Cavity Semiconductor Laser And Modules

Solid-state FMCW LiDAR with Two-Dimensional Spectral Scanning Using a Virtually Imaged Phased Array.

Holographic amplification of the diffraction angle from optical phase array for optical beam steering

Implementation of Self-Aligning System with a Single Click for the Lidar

High-precision beam array scanning system based on Liquid Crystal Optical Phased Array and its zero-order leakage elimination