Abstract:To meet the urgent need for surveying and mapping using remote sensing instruments, a hyperspectral imaging lidar using a supercontinuum laser is proposed. This novel lidar system can solve the problem of the mismatching of the traditional lidar retrieved elevation data and hyperspectral data obtained by passive imaging instruments. The optical design of the lidar receiving system is described, developed, and tested in this study. An off-axis parabolic mirror is used as the receiving telescope of the system, and a transmissive grating is used to split the received hyperspectral light to each detection channel. A fiber array equipped with a micro-lens is used to guide the split light to the detectors. In practice, several fibers can be coupled to one detector according to the wavelength sensitivity of different objects. A reference laser is used to monitor the possible energy jitter of each transmitted laser pulse in real time. A spectrum calibration of the receiving system is accomplished in the laboratory, and radiation calibration is applied by receiving the backscattered light reflected by a standard white board. The spectral resolution of a single fiber is approximately 3 nm. An outdoor 500-m distance experiment was carried out for green and yellow leaves in day and evening settings. During the experiment, the wavelength of the laser was 460-900 nm. The reflection spectra collected by the lidar system in day and evening were consistent, indicating that the design of the optical receiving system is reliable and can be used for airborne hyperspectral imaging lidar.

A Low-Cost High-Resolution Solid-State Lidar With Wavelength Division Multiplexed Components and Interleaved Orthogonal Polarization Grating Couplers

Solid-State Integrated Lidar Using Orthogonally Polarized Beams and Wavelength Division Multiplexed Components

Simultaneous Enhancement of Viewing Angle and Angular Resolution of Integrated Lidar With Bidirectional Signals and Orthogonal Polarizations

Low-Cost Solid-State Lidar with Wide Angle of View Using Wavelength Division Multiplexed Laser Array

Solid-state Lidar with wide steering angle using counter-propagating beams

Solid-State Photonics-Based Lidar With Large Beam-Steering Angle by Seamlessly Merging Two Orthogonally Polarized Beams

Integrated Solid-State Lidar Employing Orthogonal Polarizations and Counterpropagation [Invited]

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

A Hybrid Solid-State Beam Scanner for LiDAR Applications

High-Resolution Wide-Angle Lidar Using Counter-Propagating Beams with Orthogonal Polarizations

Optical System for Scanning Angle Amplification in Tunable Laser Based All-Solid Lidar

High-Speed and Low-Power Silicon Optical Phased Array Based on the Carrier-Depletion Mechanism

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

Lidar system based on lens assisted integrated beam steering.

SOA-Integrated Widely Tunable Laser Array for All-Solid Lidar Application

Monolithic Coherent LABS Lidar Based on an Integrated Transceiver Array

Monolithic Transceiver for Lens-Assisted Beam-Steering Lidar.

Blind Zone-Suppressed Hybrid Beam Steering for Solid-State Lidar

A Lidar System Based on Integrated Lens Assisted Two-dimensional Beam Steering

Optical System Design for a Hyperspectral Imaging Lidar Using Supercontinuum Laser and Its Preliminary Performance.

Beam-Steering Based on Dispersive Optical Phased Array for FMCW LiDAR Application