Abstract:Due to weak echo signals that become progressively overwhelmed by noise, measurement accuracy and effective detection range of the Coherent Doppler wind LiDAR (CDL) are often compromised. While increasing the optical local-oscillator power (OLP) can amplify the echo signal, it is constrained by the nonlinear effects of the detector. This paper introduces a method for optimizing the OLP in CDL systems. Theoretical analysis has been proposed to explore the amplification effect of OLP on echo signals, and the nonlinear effects of detectors have been studied. Simulations are performed to explore the influence of varying OLP on the signal-to-noise ratio (SNR) across different detector α (quadratic nonlinear coefficient) values. The spectral analysis method is used to directly compute the SNR of actual atmospheric wind field signals under various OLP settings. Results demonstrate consistency between calculated and simulated values, enabling determination of optimal OLP and the detector α values from fitted curves. Comparative experiments confirm significant enhancement in effective detection range (> 1.5 km) with ± 0.5 m/s accuracy. The innovation of this study lies in combining the OLP optimization method with real atmospheric wind field echo signal experiments. It addresses the challenges of directly measuring the nonlinear parameters of the detector and determining the optimal OLP. This study offers valuable theoretical and experimental insights for enhancing the wind measurement performance of CDL.

Theoretical performance of a 1.5-μm satellite-borne coherent Doppler wind lidar using a planar waveguide optical amplifier with a demonstrated figure of merit: simulation of signal detection probability, measurement precision, and bias

Simulation of Coherent Doppler Wind Lidar Measurement from Space Based on CALIPSO Lidar Global Aerosol Observations

A novel wind ladar system based on 1.55 mu m All-fiber Coherent

Research on the Performance of an Active Rotating Tropospheric and Stratospheric Doppler Wind Lidar Transmitter and Receiver

A Novel Wind Ladar System Based on 1.55μm All-Fiber Coherent Doppler Laser

Numerical Simulation of 1.55 um Coherent Lidar for Wind Measurement

1.5 mu m polarization coherent lidar incorporating time-division multiplexing

15 Μm Polarization Coherent Lidar Incorporating Time-Division Multiplexing

1.55Μm All-Fiber Coherent Doppler Lidar for Wind Measurement

Inversion Probability Enhancement of All-Fiber CDWL by Noise Modeling and Robust Fitting

Research on optimizing the optical local-oscillator power of Coherent Doppler LiDAR to enhance wind velocity measurements

Investigation on single-particle detection of continuous-waves coherent Doppler lidar: theoretical feasibility and performance comparison with multiple-particle detection state

High efficiency all fiber coherent lidar for wind measurement

Development of Direct-Detection Doppler Wind Lidar for Vertical Atmospheric Motion

Performance of Continuous-wave Coherent Doppler Lidar for Wind Measurement

1.55-Μm Pulse Coherent LIDAR with 10-Km Detection Range

Active alignment of receiving beam for coaxial optics in wind sensing coherent Doppler lidar using feedback control based on the processing of heterodyne-detected signal

Design of Direct Detection Doppler Lidar with Coherent Light Path

Meter-scale Spatial-Resolution-coherent Doppler Wind Lidar Based on Golay Coding.

Meter-scale and Sub-Second-resolution Coherent Doppler Wind LIDAR and Hyperfine Wind Observation

Mobile Rayleigh Doppler Wind Lidar Based on Double-Edge Technique