Abstract:A novel Rayleigh Doppler lidar technology based on a quadruple dual-pass Fabry–Perot interferometer (FPI) that can accurately measure wind field, temperature and aerosol backscatter ratio from the troposphere to lower stratosphere is proposed. This study aims to analyse the detection principle of wind speed, temperature and aerosol backscatter ratio in detail and obtain their measurement error formulas. The structure of this type of lidar is studied and designed. The FPI consists of two edge channels FPI-1 and FPI-2, aerosol channel FPI-M and locking channel FPI-L. FPI-1, FPI-2 and FPI-M use a dual-pass optical path, whereas FPI-L uses a single-pass optical path. The parameters of FPI are optimised as follows: the free spectral spacing (FSR) is 12 GHz, the FWHM of FPI-1 and FPI-2 are both 2.2 GHz, the peak-to-peak interval of FPI-1 and FPI-2 is 5.8 GHz, the FWHM of FPI-M and FPI-L are both 1.2 GHz, the peak-to-peak interval of FPI-M and FPI-1 is 2.9 GHz and the peak-to-peak interval of FPI-L and FPI-1 is 2.3 GHz. Under simulated atmospheric conditions, for a daytime sky background brightness of 0.3 Wsr −1 m −2 nm −1 at 355 nm, using a laser with a pulse energy of 350 mJ and a repetition frequency of 50 Hz and a telescope with a 0.45-m aperture, with a vertical range resolution of 30 m at 0–10 km, 100 m at 10–20 km and 500 m at 20–35km, temporal resolution of 30 min, zenith angle of 0° for temperature and aerosol backscatter ratio detection and temporal resolution of 3 min and zenith angle of 30° for radial wind speed detection, the detection performance of the designed Rayleigh Doppler lidar is determined. The simulation results show that the measurement errors of aerosol backscatter ratio, temperature and radial wind speed of the lidar system in the daytime and night-time are less than 4.36 × 10 −3 and 3.32 × 10 −3 (excluding cirrus cloud area), 4.0 K and 3.0 K and 3.8 m/s and 1.9 m/s, respectively, from an altitude of 0.06 to 35km.

Incoherent Doppler Lidar System Using Differential Discrimination Technique for Tropospheric Wind Measurement

Low-Altitude Wind Measurement Using Incoherent Doppler Lidar by Utilizing Both Absorption Slopes of the Iodine Absorption Spectrum

Low-altitude atmospheric wind measurement from the combined Mie and Rayleigh backscattering by Doppler lidar with an iodine filter

Fabry-Perot interferometer based Mie Doppler lidar for low tropospheric wind observation

Wind velocity retrieval and field widening techniques of fringe-imaging Mach-Zehnder interferometer for Doppler lidar

Design and performance simulation of 532 nm Rayleigh–Mie Doppler lidar system for 5–50 km wind measurement

Direct-detection Doppler Wind Measurements with a Cabannes–Mie Lidar: A Comparison Between Iodine Vapor Filter and Fabry–Perot Interferometer Methods

Design and Simulation of 532nm Rayleigh-Mie Doppler Wind Lidar System

Rayleigh Doppler Lidar Technology Based on a Quadruple Dual-pass Fabry–Perot Interferometer

1.55Μm All-Fiber Coherent Doppler Lidar for Wind Measurement

Analysis of Accuracy and Acquisition Rate of Doppler Lidar Multi-Beam Wind Measurement

Doppler Wind Lidar Sensitivity and Aerosol Backscatter Ratio Measurement by Combined Raman-Mie-Rayleigh Scattering

A comparative study on Fabry-Perot interferometer and iodine vapor filter for direct-detection Doppler wind measurements with a Cabanne-Mie lidar

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere

Low tropospheric wind profile from a 1.06 μm Doppler lidar

High-spectral-resolution Mie Doppler lidar based on a two-stage Fabry–Perot etalon for tropospheric wind and aerosol accurate measurement

Doppler Wind Lidar Based on Fabry-Perot Etalon

Quasi Single Mode Design and Implementation of Doppler Lidar Frequency Discrimination System Based on Multimode Fiber Mach-Zehnder Interferometer

A Rotary Platform Mounted Doppler Lidar for Wind Measurements in Upper Troposphere and Stratosphere

Application and Analysis of the Dual Fabry-Perot Etalon in a Direct Detection Wind Lidar