Abstract:We present the design, fabrication and characterization of polymer optical waveguides using a digital ultraviolet (UV) lithography. Grayscale optical exposure with a nonlinear compensation in quadratic form is applied to minimize the stitching loss of the transition zone between two adjacent subpatterns. Proximity effects in lithography process are compensated based on an exposure dose-map that is calculated under the approximation of scattered light pixel with a Gaussian distribution. The bending loss and propagation loss of the fabricated polymer waveguides are experimentally characterized to be around 0.1 dB/90°-bend and 0.238 dB/mm, respectively. Moreover, 1 × 2 multimode-interference power splitter, 1 × 2 Y-branch power splitter and microring resonator are demonstrated to show the feasibility of the lithography technology on rapid fabrication of waveguides. Such a UV lithography technology flexibly manipulates huge-number light pixels for all-digital grayscale and dynamic optical exposure and thus can enable the fabrication of novel optical waveguide-based devices and sensors, such as 2.5D waveguides for multimode crossing and polymer waveguide devices for biosensing.

Fabrication Of 32x32 Arrayed Waveguide Grating Using Fluorinated Polymers

Fabricated Technology for Polymer/si Arrayed Waveguide Grating

Design and fabrication of arrayed waveguide grating using fluoropolymer PFS-co-GMA

Athermal Silicon Arrayed Waveguide Grating With Polymer-Filled Slot Structure

Design and fabrication of 1 × 32 silica-based arrayed waveguide grating

Polymeric Flat Focal Field Arrayed Waveguide Grating Using Electron-Beam Direct Writing

Fabrication of a 17×17 Polymer Arrayed Waveguide Grating with Flat Spectral Response

Simulation and design for an arrayed-waveguide grating made of fluorinated polymers

Thermo-optically tunable arrayed-waveguide-grating made of polymer/Si

Simulation and design for an arrayed-waveguide grating made of flourinated polymers

Slot-based Athermal Silicon Arrayed-Waveguide Grating (AWG)

Polymeric 1×32 arrayed waveguide grating multiplexer using cross-linkable fluorinated poly (ether ether ketone) at 1550nm

Silica-Based Arrayed Waveguide Grating With Flattened Spectral Response Using A Multimode Interference Coupler

33 × 33 Arrayed Waveguide Grating Multiplexer Using Fluoropolymer PFS-co-GMA

Design and Fabrication of a Polymeric Flat Focal Field Arrayed Waveguide Grating.

Effect of reactive ion etching process on simulation of polymeric arrayed waveguide grating multiplexers

Fabrication of Polymer Optical Waveguides by Digital Ultraviolet Lithography

Fabrication Techniques For Polymer/Si Optical Waveguide

Index Gratings in Low Glass Transition Temperature Polymer Composites Based on Poly(N-Vinylcarbazole)

Polymer Gratings with Low Surface Relief Based on Photopolymerization-Induced Internal Diffusion

High-Efficiency and Polarization-Insensitive Grating Couplers on Thin-Film Lithium Niobate Waveguides