Abstract:We present the design, fabrication and characterization of polymer optical waveguides using a digital ultraviolet (UV) lithography. Grayscale optical exposure with a nonlinear compensation in quadratic form is applied to minimize the stitching loss of the transition zone between two adjacent subpatterns. Proximity effects in lithography process are compensated based on an exposure dose-map that is calculated under the approximation of scattered light pixel with a Gaussian distribution. The bending loss and propagation loss of the fabricated polymer waveguides are experimentally characterized to be around 0.1 dB/90°-bend and 0.238 dB/mm, respectively. Moreover, 1 × 2 multimode-interference power splitter, 1 × 2 Y-branch power splitter and microring resonator are demonstrated to show the feasibility of the lithography technology on rapid fabrication of waveguides. Such a UV lithography technology flexibly manipulates huge-number light pixels for all-digital grayscale and dynamic optical exposure and thus can enable the fabrication of novel optical waveguide-based devices and sensors, such as 2.5D waveguides for multimode crossing and polymer waveguide devices for biosensing.

Fabrication Techniques For Polymer/Si Optical Waveguide

Fabrication techniques for colymer/Si optical waveguide

Fabricated Technology for Polymer/si Arrayed Waveguide Grating

Aluminum Mask for Fabrication of Polymeric Optical Waveguide

Fabrication of Si/Si1-Xgex Waveguide Wdm Components

Fabrication of silicon-on-glass waveguides

Fabrication and Performance Evaluation of Polymer Waveguides for Optical Printed Circuit Board Applications

Fabrication of Low Loss Polymer Inverse Ridge Waveguide Using Inductively Coupled Plasma Etching

Fabrication and Performance Analysis of Polymer Waveguides for Optical Interconnects

Study of Reactive Ion Etching Process to Fabricate the PMMA-based Polymer Waveguide

Study of Silicon-on-glass Waveguides

Fabrication and Measurement of Polymer/si Arrayed Waveguide Grating Multiplexer

Simple Ultraviolet-Based Soft-Lithography Process for Fabrication of Low-Loss Polymer Polysiloxanes-Based Waveguides

Fabrication of long-range surface plasmon polaritons waveguide by wet chemical etching

Fabrication of Optical Organic Polymer Waveguides

Laser Annealing of SiO2 Film Deposited by ICPECVD for Fabrication of Silicon Based Low Loss Waveguide

All-polymeric planar waveguide devices based on a gas-assisted thermal imprinting technique

Fabrication of Polymer Optical Waveguides by Digital Ultraviolet Lithography

High-Extraction-Rate Ta2O5-Core/SiO2-Clad Photonic Waveguides on Silicon Fabricated by Photolithography-Assisted Chemo-Mechanical Etching (PLACE)

Optical Parameter Accurate Measurement for Polymer Waveguide Amplifier Materials and the Device Fabrication

Fabrication and Characterization of Silicon Photonic Waveguides and Devices Via Selective Oxidation Process