Abstract:The development of thermomechanical coupled simulations for rolling contacts is challenging when the adjacent material is temperature-dependent or when there are cracks or other discontinuities on the contact surface. This paper proposes a novel thermomechanical coupled modeling method for rolling contacts using a nonlocal peridynamic (PD) approach. Fully coupled, ordinary state-based PD thermomechanical equations for the plane strain and plane stress cases are derived based on the strain-energy density, including thermal coupling terms, and detailed information on each parameter is provided. Subsequently, an algorithm for rolling thermal contacts in PD is proposed based on the penalty method. This study further provides a detailed modeling process and an algorithm for the proposed method based on a multi-rate time-integration scheme for numerical implementation. A typical two-dimensional (2D) wheel–rail rolling contact model is established to evaluate the performance of the proposed contact modeling method in wheel–rail thermal contact and to analyze the influence of temperature-dependent material and rail-surface cracks on the thermomechanical response. It is found that the contact stress and rail-surface temperature rise in the case of small creepages and temperature-independent materials are in good agreement with the analytical solution. In the case of large creepages, the mechanical and temperature results of using temperature-dependent materials and temperature-independent materials are quite different, and the frictional heat generated can cause martensitic transformation of adjacent materials. Rail-surface cracks cause a sharp increase in the contact stress and temperature rise near the cracks, and the high temperature also promotes crack growth.

Thermal-Mechanical Finite Element Analysis Of The Rolling-Sliding Contact With Inclusion

Heat Analysis of Sliding Abrasive Particle Micro Contact Process by Finite Element Method

Numerical Analysis of Rolling-Sliding Contact with Frictional Heating

Numerical analysis of rolling contact fatigue crack initiation Considering material microstructure

Finite Element Analysis of Contact Stresses on the Backup Roll of CVC Hot Rolling Mills

Finite Element Analysis of Temper Rolling Process

Evolution of Surface Crack on Slab During Rough Rolling Using Thermal-Mechanical FEM

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Influence Of Rough Surface On Damage Evolution And Fatigue Life Of M50-Bearing Steel Containing A Spherical Inclusion

THERMOMECHANICAL COUPLED FINITE-ELEMENT MODELLING OF SLAB HOT ROLLING

A General Phase-Field Model for Simulating Impact-Sliding Contact Failure

FEM simulation of thermo-mechanical stress and thermal fatigue life assessment of high-speed steel work rolls during hot strip rolling process

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

The Fem Analysis Of Rolling-Sliding Contact Under Boundary Lubrication'S

Deduction of a quadratic velocity field and its application to rolling force of extra-thick plate

Finite Element Analysis of Stainless Steel Under Coupled Deformation and Friction Condition

Frictional heat accumulation at cyclically rolling-sliding contacts with consideration to time-dependent contact pressure

Nonlocal Thermomechanical Coupled Modeling Method for Two-dimensional Rolling Contact Using a Peridynamic Approach

On the effect of microplasticity on crack initiation from subsurface defects in rolling contact fatigue

A 3D Finite Element Model of Rolling Contact Fatigue for Evolved Material Response and Residual Stress Estimation

Failure of High-Speed Bearing at Cyclic Impact-Sliding Contacts: Numerical and Experimental Analysis