Abstract:In the roll bending process, the rolling force acting on the roller shafts is one of the most important parameters since, on the one hand, it determines the process settings including the pre-loading, and, on the other hand, its distribution and size may affect the integrity of both the bending system and the final product. In this study, the three-roller bending process was modeled using a two-dimensional plane–strain finite element method, and the rolling force was determined as a function of plate thickness, upper roller diameter, and yield strength for various API steel grades. Based on the numerical simulation results, a critical bending angle of 41° was identified and the rolling systems were divided into two categories, of less than or equal to, and greater than 41°, and an analytical model for predicting the maximum rolling force was developed for each category. To determine the optimal pre-tensioning force, two optimization formulations were proposed by minimizing the maximum equivalent stress and the absolute maximum displacement. The rolling forces predicted by the analytical models were found to be in good agreement with the numerical simulation results, with relative errors generally less than 10%. The predictive analytical models developed in this study capture well the complex deformation behavior that occurs during the roll bending process of steel plates, providing guidelines and predictions for industrial applications of this process.

Finite Element Analysis of Temper Rolling Process

Numerical Simulation and Experimental of Forming Defects in Roll-Bending Process for Z-Shaped Profiles With Large Cross-Section

Simulation of Unsteady State Rolling Processes by Thermal-mechanical Coupled Rigid-plastic Finite Element Methods

Stress Simulation and Rolling-thoroughness Analysis of Aluminum Alloy Plate in Conversable Hot Rolling

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

Thermal-Mechanical Finite Element Analysis of Evolution of Surface Cracks During Slab Rolling

Aluminum Hot Finishing Rolling Three-Dimensional Finite Element Simulation of Temperature Field in the Rolling Area

Coupled Thermal-Mechanical Simulation of Front End Bending in Hot Rolling

FINITE ELEMENT ANALYSIS OF STEADY STATE HV ROLLING PROCESS OF SLAB

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

Thermo-mechanical coupled simulation during rolling on aluminum alloys

FEM Analysis of Effect of Bending Force on the Plate Shape of the Strip

Numerical Simulation Study of Mental Flow Law of Low-Carbon Steel in Hot Rolling

The Three-Dimensioned Thermo-Mechanical Coupled Simulation Analysis of Hot Rolling Process of the Aluminum Alloy Strip

Simulation of Roll Forming with Dynamic Explicit Finite Element Method

The Simulation of Roll Forming with Multiple Passes

Numerical Simulation and Parameters Analysis for Roll Forming of Martensitic Steel MS980

Coupling Analysis of Multipass V-H Rolling Process by FEM

Study on Rolling Force during Asymmetric Rolling Process