Abstract:The generation of wheel–rail-sliding frictional heat is often accompanied by transverse displacement of a wheel. To study the thermal problem of wheel–rail sliding friction at two-point contact, this paper uses an LM tread wheel and a 60 kg·m−1 rail as examples. A thermal–mechanical-coupled finite-element model of equal proportion wheel–rail sliding is established. A direct-coupling method is used to analyze the thermal–mechanical coupling of the wheel–rail interface under sliding contact. This model considers the temperature-dependent material properties and boundary conditions, such as thermal convection and thermal dissipation, in the process of nonstationary frictional-heat conduction. Firstly, the effects of different sliding speeds, axle loads, and contact modes on the temperature and stress fields of the contact area are analyzed. Then, the lubrication and cooling effects of friction modifiers on the rail top and rail gauge angle are compared. The results show that, at a sliding speed of 2 m/s and an axle load of 30 t under a sliding condition of 200 mm, on the top and side of the rail, the temperatures at the contact patch centers are 813 °C and 547.7 °C, respectively. Under different operating conditions, the rail-side temperature is 55–75% of that of the temperature at the rail top, and the rail-side contact and friction stress values are 76–96% of those at the rail top. This indicates that frictional thermal damage on the rail side cannot be ignored. With a lower sliding speed, the thermal response of the two contact patches is closer. The impact of axle load on the frictional temperature and stress on the rail side is more critical than the sliding speed. The optimal lubrication choice is overall lubrication, which can decrease the rail top temperature by 47.2% and frictional stress by 56.2%, as well as decreasing the rail side temperature by 70.3% and frictional stress by 77.4%.

Numerical Analysis of Rolling-Sliding Contact with Frictional Heating

Heat Analysis of Sliding Abrasive Particle Micro Contact Process by Finite Element Method

Frictional heat accumulation at cyclically rolling-sliding contacts with consideration to time-dependent contact pressure

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

Experimental and Finite Element Analysis of Frictional Heat Distribution during Sliding Friction

Elastic shakedown analysis of two-dimensional thermo-elastic rolling/sliding contact for a functionally graded coating/substrate structure with arbitrarily varying thermo-elastic properties

Numerical Analysis of a Thermal Frictional Contact Problem with Long Memory

Numerical Method for Solving Contact Problems under Partial Slip Conditions

Thermal–Mechanical Coupling Analysis of Wheel–Rail Sliding Friction under Two-Point Contact Conditions

Calculation of Temperature Field in Dry Sliding Contact at Different Speeds

Temperature Rise in Frictional Sliding Contact of Elastic–Plastic Solids with Fractal Surface

Numerical Study of Coupled Electrical-Thermal-Mechanical-Wear Behavior in Electrical Contacts

Numerical Analysis Of Rail Rolling Contact Fatigue

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Calculation of Temperature Fields of Bodies in Sliding Contact Without Lubrication

Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments

Frictional contact analysis in a spherical roller bearing

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Nonlocal Thermomechanical Coupled Modeling Method for Two-dimensional Rolling Contact Using a Peridynamic Approach

Finite Element Analysis of Contact Stresses on the Backup Roll of CVC Hot Rolling Mills