Abstract:A colloidal stability study of a nonaqueous silicon carbide suspension is of great significance for preparing special silicon carbide ceramics by colloidal processing. In this paper, three different chemical dispersants, which are amphiphilic, acidophilic, and alkaliphilic, are selected to compare their ability to stabilize nonaqueous slurries of silicon carbide. The analysis of the flow index factor is first used to estimate the colloidal stability of the suspensions. The results show that the addition of only 5 wt.% polyvinylpyrrolidone (PVP) forms a silicon carbide slurry with a low viscosity value of 17 mPa⋅s at 25 s−1. In addition, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS)measurements indicate that the PVP molecule is successfully adsorbed on the surface of silicon carbide. The different adsorption models are fitted, and the adsorption of PVP molecules on the surface of silicon carbide belongs to the Langmuir single-layer adsorption model. At the optimal PVP amount, the volume content of the suspension is as high as 22.27 vol.%, a Newtonian-like fluid still appears, and no agglomerate structure is formed in the system. After the volume content exceeds 22.27 vol.%, the flow index factor of the slurry begins to plummet, indicating that the slurry begins to transform from a Newtonian-like fluid to a shear-thinning fluid. The particles undergo inevitable agglomeration accompanied by the emergence of yield stress. Finally, a maximum solid loading of the system is predicted to be 46 vol.%, using the Krieger-Dougherty model.

Study On Gelcasting Of Silicon Carbide

Gelcasting of Concentrated Aqueous Silicon Carbide Suspension

Study on gelcasting and properties of recrystallized silicon carbide

Colloid and Rheological Property of the Concentrated SiC/Si Suspensions

Study on Gelcasting of Silicon Nitride-Bonded Silicon Carbide Refractories

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Formation of Silicon Nitride Bonded Silicon Carbide by Aqueous Gelcasting

Electrokinetic and gel behavior of Si3N4 aqueous suspension

Gelcasting of silicon carbide based on gelation of sodium alginate

Gas-discharging Reactions in Gelcasting of Si-containing Materials and Their Effect on Microstructure of Green Bodies

Gel-Casting Of Fused Silica Ceramic And Its Sintering Process

Direct Coagulation Casting of Silicon Carbide Suspension Via Polyelectrolyte Dispersant Crosslink Reaction

Study on the Process of Si3N4 Ceramic with High Properties by Gel-casting

Gas-discharging reactions and their effect on the microstructures of green bodies in gelcasting of non-oxide materials

PREPARING Si3N4 CERAMICS WITH HIGH PERFORMANCES BY GELCASTING (I)INFLUENCE OF COATING Si3N4 POWDER ON MECHANICAL PROPERTIES OF THE MATERIAL

Water-Based Gelcasting of Surface-Coated Silicon Nitride Powder

The Gel-Casting Of Non-Oxide Ceramics

DISPERSION AND RHEOLOGICAL PROPERTY OF THE CONCENTRATED SiC SUSPENSION

Study on Rheological Behavior of Micro/Nano-Silicon Carbide Particles in Ethanol by Selecting Efficient Dispersants

Preparation of HEMA gel-casted SiC ceramics combined with LPS sintering

Fabrication of ZrB 2 -Sic Ceramic Composites by Optimized Gel-Casting Method