Abstract:The earthquake forces used in design codes of buildings should be theoretical determinable. This work examines the seismic force modification factorR based on elastic-plastic time-history earthquake analysis of SDOF systems, wherein the hysteresis models are elastic-perfectly-plastic (EPP), elastic-linearly-hardening (ELH), shear-slipped and bilinear-elastic. The latter two models are analysed for separating the effect of the ductility and the energy-dissipating capacity. Three-hundred eighty-eight earthquake records from different site conditions are used in analysis. The ductility is taken to be 2, 3, 4, 5 and 6, with the damping ratio being 0.02, 0.035 and 0.05 respectively. The post-yield stiffness ratios 0.0, 0.1 and 0.2 are used in the analysis. TheR spectra are standardized by the characteristic period of the earthquake records, which leads to a much smaller scatter in averaged numerical results. It was found that the most important factor determiningR is the ductility.R increases more than linearly with ductility. The energy-dissipating capacity, damping and the post-yield stiffness are the less important factors. The energy dissipating capacity is important only for structures with short period and moderate period (0.3≤T/T g <5.0). For EPP and ELH models,R for 0.05 damping is 10% to 15% smaller than for 0.02 damping. For EPP and ELH models, greater post-yield stiffness leads to greaterR, but the influence of post-yield stiffness is obvious only when the post-yield stiffness is less than 10% of the initial stiffness. By means of statistical regression analysis the relation of the seismic force modification factorR with the natural period of the system and ductility for EPP and ELH models were established for each site and soil condition.

System-Level Nonlinear Seismic Response Characteristics Of Steel Structures

Estimation of system-level ductility demands for multi-story structures

Curvature Ductility-Based Seismic Force Reduction Factor of Flexure-Type Structure

Ductility Factors of Steel Plates Subjected to Non-Uniform Compression and Section Classification for Seismic Design

Seismic Force Modification Factor for Ductile Structures

SEISMIC-FORCE-MODIFICATION FACTOR FOR STRUCTURES WITH BILINEAR ELASTOPLASTIC MODEL

Seismic-design-oriented Classification of Structures and Members and Structure Influence Coefficient

Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor

Dynamic P-△ Effects on Seismic Force Modification Factors

Nonlinear Static Seismic Reliability Analysis of Steel Frame Structures II: Reliability Index and Its Sensitivity

SEISMIC FORCE MODIFICATION FACTORS FOR STRUCTURES WITH SHEAR-SLIP HYSTERETIC MODEL

Constant-ductility Strength Demand Spectra for Seismic Design of Structures

The Damping Effect on Constant-Ductility Seismic Demand Spectra of Inelastic Structures

A Unified Form for Response of 3 D Generally Damped Linear Systems under Multiple Seismic Loads through Modal Analysis

Analysis of influence of dynamic characteristics of structures on strength reduction factors

Analysis of Seismic Behaviour of Welded Steel Connections and Frames with Differently Constructed Connections

Nonlinear Static Seismic Reliability Analysis of Steel Frame Structures:I Finite Element Response and Its Sensitivity

Seismic response of non-structural components in multi-storey steel frames

Effects of Structural and Seismic Factors on the Constant-Strength Ductility Spectra Based on NGA-West2 Database

Developments in seismic structural analysis and design

Study on Seismic Collapse Capacity of Single-Degree-of-freedom Structural System