Abstract:In the present seismic design philosophy, the structures are designed to remain within the specified displacement limits for multiple earthquake hazard levels expected during their design life. Accordingly, the estimation of maximum inelastic displacement demand in a structure consistent with a given hazard level is of primary importance. Considering the complexity and inconvenience associated with the nonlinear response history analyses for a suite of hazard‐consistent ground motions, it is preferred to estimate the maximum inelastic displacement demand by using the scaling models available for the inelastic displacement ratio C in the single‐degree‐of‐freedom (SDOF) structures. In this study, a new scaling model is developed for the inelastic displacement ratio CR(T) spectrum for a given response reduction factor R in the case of 5%‐initial damping Bouc‐Wen‐Baber‐Noori (BWBN) oscillators with stiffness and strength degradations and pinching. This model is based on the observed similarities between the CR(T) spectrum and the reciprocal of given displacement response SD(T ) spectrum in most cases, and thus, this indirectly accounts for the effects of seismological and site parameters. A new strong‐motion duration definition is also proposed to identify shorter strong‐motion segments of comparable relevance, and on using this definition, it is shown that the dependence of the mean CR(T) spectrum on strong‐motion duration may be considered negligible. Accordingly, the regression parameters of the proposed scaling model for CR(T) spectrum are estimated as the exponential functions of only five governing BWBN parameters. The best‐fit estimates of the regression coefficients of the resulting prediction equations are obtained for three values of R. The residual error spectra are also modeled to estimate the CR(T) spectrum for a given confidence level. The proposed scaling model can be applied to a wide range of existing reinforced concrete (RC) structures with 5% initial damping by using the input of the design displacement spectrum and BWBN parameters.

Inelastic Displacement Amplification Factor for Ductile Structures with Constant Strength Reduction Factor

Seismic Force Modification Factor for Ductile Structures

Dynamic P-△ Effects on Seismic Force Modification Factors

SEISMIC FORCE MODIFICATION FACTORS FOR STRUCTURES WITH SHEAR-SLIP HYSTERETIC MODEL

SEISMIC-FORCE-MODIFICATION FACTOR FOR STRUCTURES WITH BILINEAR ELASTOPLASTIC MODEL

Static and dynamic inelastic P -Δ effect for seismic design

Yield Point Spectra with constant ductility

Seismic Force with Different Ductility Factor in Strength Degrading System

Normalized Inelastic Deformation Ratio Spectra

Inelastic Spectrum Normalization Considering P-Δ Effects

Inelastic Yielding Strength Demand Coefficient Spectra

Seismic Force Modification Factors for Modified-Clough Hysteretic Model

Spectra of Seismic Force Reduction Factors of MDOF Systems Normalized by Two Characteristic Periods

Curvature Ductility-Based Seismic Force Reduction Factor of Flexure-Type Structure

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Seismic Responses of Postyield Hardening Single–degree‐of‐freedom Systems Incorporating High‐strength Elastic Material

Ductility-strength and strength-ductility relations for a constant yield displacement seismic design procedure

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Probability-based analytical model for predicting the post-earthquake residual deformation of SDOF systems

The normalized inelastic displacement spectra for seismic response estimation of a SDOF system with a generalized flag-shaped hysteretic model

Estimation of inelastic displacement ratio spectrum for existing RC structures via displacement response spectrum