Abstract:Electrodeposited zinc-nickel alloy coatings have been widely adopted for surface treatment of automobile body steel sheet for high corrosion resistance. The corrosion behavior of the coatings has been related with the components of nickel, and the zinc-nickel alloy passive coatings have much higher corrosion resistance than that of zinc-nickel alloy coatings. In the present paper, the corrosion resistance behavior of the zinc-nickel alloy coatings obtained by new process and formulation has been studied by means of the electrochemistry test and neutral salt spray test. And it is discovered that the properties of corrosion resistance of zinc-nickel alloy passive coatings were better than that of zinc passive coatings, Cadmium passive coatings and alloys of electrodeposited cadmium-titanium. The components of corrosion productions, in terms of X-ray diffraction (XRD), are mainly ZnO, ZnCl2 center dot 4Zn(OH)(2) and small quantity of 2ZnCO(3)center dot 3Zn(OH)(2). The component of zinc-nickel alloy coatings has been investigated with Glow Discharge Optical Emission Spectrometry (GDA-750). And it is found that as the thickness of zinc-nickel alloy coatings increases, the component of zinc increases from beginning to end, but the peak value of nickel appears and an enrichment of nickel in the coatings comes into being. Because the electrodeposited zinc-nickel alloy coatings exhibit different alloy phases as a function of their alloy composition, in this paper, the crystal structure changing with the different component of nickel has been studied in terms of XRD. The result shows that electrode posited zinc-nickel alloy has different phases: alpha-phase, a solid solution of zinc in nickel with an equilibrium solubility of about more than 79% nickel; gamma-phase, an intermediate phase with a composition Ni5Zn21; eta-phase, a solid solution of nickel in zinc with less than 5% nickel; and 8-phase (Ni3Zn22) appeared from eta-phase to alpha-phase with increasing content of nickel. Copyright (C) 2009 John Wiley & Sons, Ltd.

Experimental Research of Anticorrosion Performance of Steel with Ni-Sn-P Coating

The Structure And Protective Properties Of Zinc And Nickel Alternate Electrodeposits

Study on Corrosion Resistance of Electroplating Zinc–nickel Alloy Coatings

Plating Bath Composition Optimization And Corrosion Resistance Of Ni-Sn-Mn Amorphous Coating Prepared By Electrodeposition

Study on the Anticorrosion Property of Electroless Ni-P Plating Coating

Corrosion Behavior of Low Pressure Cold Sprayed Zn-Ni Composite Coatings

Electrochemical Study of Corrosion Resistance of Electropla-ted Zn-Ni Alloy Coatings

Fabrication of NiCo Coating by Electrochemical Deposition with High Super-Hydrophobic Properties for Corrosion Protection

Influence of Pre-electroplating Ni on Resistance of Sn-8Zn Coating to Neutral Salt Spray Corrosion

The Process for Electroplating of Zinc-Nickel Alloy Coating and Corrosion Resistance of the Coating

Study on Microstructure and Corrosion Resistance of Alkaline Zn-Ni Alloy Plating

High Corrosion-Resistant Ni–P/Ni/Ni–P Multilayer Coatings on Steel

Effect of Sn on the structure and corrosion of the Ni-Sn-P coatings

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Study on corrosion resistance of Ni–P/PVDF composite coating by electroless plating

Study of the Corrosion Resistance of Eletroless Amorphous Ni-P and Ni-Sn-P Coatings in Weak Acidic Medium

Preparation of Cu-Ni-Fe alloy coating and its evaluation on corrosion behavior in 3.5% NaCl solution

Study On The Wear And Seawater Corrosion Resistance Of Ni-Co-P Alloy Coatings With Jet Electrodeposition In Different Jet Voltages And Temperatures Of Plating Solution

Study on Preparation and Corrosion Resistance of Ni-carbon Nano-tubes Compound Coating

Steel Anti‐Corrosion Strategy Enables Long‐Cycle Zn Anode (Adv. Energy Mater. 1/2023)

Insights into the Electrochemical Corrosion Behavior and Mechanism of Electroless Ni-P Coating in the CO2/H2S/Cl− Environment