Abstract:The corrosion of materials in sea environment are generally caused by salt spray, tidal action and adhesion of marine organisms. It is necessary to ensure the materials possess the required strength and good corrosion resistance during operation. Although the existing Ni-W-P electroless plating can provide a certain degree of corrosion protection, its corrosion resistance is still limited under harsh marine condition. SiO2 nanoparticles have received extensive concern due to their excellent corrosion resistance, which has been considered as potential candidates for enhancing corrosion resistance in multicomponent electroless coatings. In this study, the electroless Ni-W-P coatings with SiO2 nanoparticles co-deposition on the Q235 substrate was prepared. The coating was characterized through scanning electron microscopy (SEM), X-ray diffraction (XRD), polarization techniques, and electrochemical impedance spectroscopy (EIS). As a result, the Ni-W-P coating co-deposited with SiO2 nanoparticles demonstrates superior corrosion resistance compared to the pure Ni-W-P coating. The surface of SiO2 nanoparticles contain three distinct bonded hydroxyl functional groups, which can influence the ionic reaction in the plating solution and the deposition of elements in the coating. After modified by PVA, it can be uniformly dispersed in the coating, and the composite coating with SiO2 nanoparticles co-deposited is transformed into a nanocrystalline structure. The even distribution of SiO2 nanoparticles fill the defects within the coating, leading to a reduction in porosity, permeability, and susceptibility to penetration of corrosive media. Concurrently, the nanoparticles facilitate surface passivation, forming a stable interface with substrate and coating that inhibits electrochemical reactions and diminishes the rate of self-corrosion reactions. The good and stable corrosion resistance is achieved at the SiO2 concentration of 9 g/L and PVA concentration of 1.08 g/L. These findings offer valuable insights for addressing corrosion challenges in the field of marine engineering.

Study On The Wear And Seawater Corrosion Resistance Of Ni-Co-P Alloy Coatings With Jet Electrodeposition In Different Jet Voltages And Temperatures Of Plating Solution

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Preparation and Investigation of Ni–Co–P Alloy Coatings Using Jet Electrodeposition with Varying Pulse Parameters

Effects of deposition current density, time and scanning velocity on scanning jet electrodeposition of Ni-Co alloy coating

Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition

Electrodeposition and corrosion performance of Ni-Co alloys with different cobalt contents

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

Evaluation of corrosion resistance of electrodeposited nanocrystalline Ni–Fe alloy coatings

Investigation on corrosion resistance of electroless Ni-W-P coatings co-deposited with SiO2 nanoparticles

Influence of Plating Temperature on the Morphology,Hardness and Corrosion Resistance of Electroless Ni-P Alloy Plating

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

Electrodeposition of nanocrystalline Ni-Mo alloys in pyrophosphate baths

Investigation of Corrosion Resistance in Stainless Steel 316L Alloy of Energy Separator by Electroless Plating (Ni-Zn-P)

The Research on Coating of Electroless Ni-W-P Ternary Alloys

Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Effect of Cobalt Content on the Properties of Nickel-Cobalt Alloy Coatings

Study on Electroless Plating Ni-W-P Ternary Alloy with High Tungsten from Compound Complexant Bath

The Performance of Zn-Ni Alloy Coating Electrodeposited from Stabilized Bath

Preparation and characterization of Ni-P-Al2O3-PTFE nanocomposite coatings by unidirectional jet electrodeposition

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel