Development of the Resonant Fiber Optic Gyroscope Prototype

Lu Liu,Weiwen Qian,Shuang Liu,Junyu Tu,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1109/icocn53177.2021.9563715

2021-01-01

Abstract:This paper presents latest progress in the development of a packaged resonant fiber optic gyroscope prototype with a single semiconductor laser, which achieves a bias stability of 0.14°/h and an angle random walk of 0.05 °/ vh.

What problem does this paper attempt to address?

A Hollow-Core Photonic-Crystal Fiber-Optic Gyroscope Based on a Parallel Double-Ring Resonator.

Heliang Shen,Kan Chen,Kang Zou,Yijia Gong,Ran Bi,Xiaowu Shu

DOI: https://doi.org/10.3390/s21248317

IF: 3.9

2021-01-01

Sensors

Abstract:A novel system structure of resonant fiber optical gyroscope using a parallel double hollow-core photonic crystal fiber ring resonator is proposed, which employs the double closed loop and reciprocal modulation–demodulation technique to solve the problem of the length mismatch between rings. This structure can suppress the residual amplitude modulation noise and laser frequency noise, essentially eliminating the influence of the Rayleigh backscattering noise and dramatically reduce the Kerr-effect-induced drift by three orders of magnitude. Thanks to its excellent noise suppression effect, the sensitivity of this novel system can approach the shot-noise-limited theoretical value of 8.94 × 10−7 rad/s assuming the length of the fiber ring resonator is 10 m.
Compact Resonant Fiber-Optic Gyroscope with a Broadband Light Source

Junyi Hu,Shuang Liu,Qianqian Wang,Huilian Ma

DOI: https://doi.org/10.1364/ofs.2023.th6.48

2023-01-01

Abstract:A compact broadband source-driven resonant fiber-optic gyroscope prototype is assembled and tested. The angle random walk is 0.0037°/√h and bias stability is 0.0069°/h for a 175-m long fiber coil of 5.7 cm diameter.
Optimizing the Broadband Source-Driven Resonant Fiber-Optic Gyroscope

Shuang Liu,Junyi Hu,Yuxin Wang,Hewei Wang,Lu Liu,Huilian Ma

DOI: https://doi.org/10.1364/ofs.2023.th6.47

2023-01-01

Abstract:We optimized the fiber-optic ring resonator used in the broadband source-driven resonant fiber-optic gyroscope and reported the latest gyroscope test results with bias stability ranging from 1°/h to 450µ°/h when using different fiber coil lengths.
Resonant Fiber Optical Gyroscope Using the Single-Mode Fiber Ring Resonator.

Lu Liu,Shuang Liu,Weiwen Qian,Hanzhao Li,Huilian Ma

DOI: https://doi.org/10.1364/ao.429941

IF: 1.9

2021-01-01

Applied Optics

Abstract:This paper provides a scheme for realizing high-accuracy, low-cost resonant fiber optical gyroscopes (RFOGs) with single-mode (SM) fibers. The temperature-related polarization noise, which deteriorates the bias stability of the RFOG, has been suppressed thanks to a much longer birefringence beat length of SM fibers. It is also helpful to improve the theoretical sensitivity of the RFOG because of the very low loss of the SM fiber components. A transmissive 39-m-long SM fiber ring resonator (FRR) is fabricated. The measured finesse is 58.7, and its total loss is calculated to be less than 0.3 dB. Using this SM-FRR as the sensing element, an RFOG is then set up that achieves an angular random walk of 0.0039∘/√h and a bias stability of 0.05°/h. The experimental results show that the SM-FRR scheme would be a good candidate for producing high-accuracy and low-cost RFOGs.
Navigation-grade Resonant-Fiber Optic Gyroscope with a Broadband Source

Huilian Ma,Shuang Liu,Junyi Hu,Lu Liu,Yuxin Wang,Hewei Wang

DOI: https://doi.org/10.1364/cleo_si.2023.sf1h.1

2023-01-01

Abstract:We report a broadband source-driven resonant-fiber optic gyroscope with 0.0029°/h 1/2 angle random walk and 0.0063°/h bias stability when using a 100-meter-long fiber-optic ring resonator of 7.6 cm diameter.
Closed-loop Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Shuang Liu,Junyi Hu,Lu Liu,Qingwen Liu,Huilian Ma,Zuyuan He

DOI: https://doi.org/10.1109/icocn55511.2022.9901145

2022-01-01

Abstract:This paper presents a closed-loop resonant fiber-optic gyroscope with a broadband source. In the experiment, a bias stability of 0.008°/h is successfully demonstrated with a 100m-long fiber-optic ring resonator of 7.6 cm diameter.
Angular Random Walk Improvement of Resonant Fiber Optic Gyroscopes

Lu Liu,Hanzhao Li,Junyu Tu,Yi Lin,Weiwen Qian,Huilian Ma

DOI: https://doi.org/10.1364/cleopr.2020.c7d_2

2020-01-01

Abstract:An angular random walk of 0.0021°/√h is experimentally demonstrated over a resonant fiber optic gyroscope employing a semiconductor laser as the light source and a 29 m-long fiber ring resonator as the rotation-rate sensing element.
Research Progress of the Resonant Fiber Optic Gyroscope Technology

Linglan Wang,Yuchao Yan,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1117/12.2197580

2015-01-01

Abstract:The resonant fiber optic gyro (RFOG) is a high accuracy inertial rotation sensor based on the Sagnac effect. The existence of various noises, including the nonreciprocal noises such as the polarization noise and the Kerr noise as well as the reciprocal circuit noise, limits the performance improvement of the RFOG. An improved scheme by inserting two in-line polarizers in the polarization maintaining fiber transmission-type resonator has been proposed to suppress the polarization-fluctuation induced drift. Furthermore, the adoption of the air-core photonic bandgap fibers (PBFs) offers a novel solution to reduce the optical Kerr effect. In addition, A digital signal processor is designed to reduce the reciprocal noises and detect the rotation information. A minimum actual rotation of 0.001°/s is achieved. The dynamic range is improved by a factor of 7 and the scale factor nonlinearity is decreased by a factor of 60.
A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Haibin Wu,Xudong Zheng,Yaojie Shen,Xuetong Wang,Zhonghe Jin,Zhipeng Ma

DOI: https://doi.org/10.1109/sensors47087.2021.9639632

2021-01-01

Abstract:The work illustrates a resonant constant-frequency (RCF) driving technique used in a MEMS gyroscope which has linear frequency-tuning triangular capacitors. Differing from that conventional driving technique where the gyroscope excitation frequency is time-varying, the RCF strategy assures that the excitation frequency and resonant frequency are equal and constant in the gyroscope drive mode by means of frequency-tuning feedback. As a result, RCF can eliminate effects of excitation-frequency instability and drift on gyroscope output performance. Combining RCF with real-time automatic mode-matching, the tested gyroscope with sense-mode quality factor of 26.75k has achieved bias instability of 0.09 °/h and angle random walk of 0.0087°/√h.
Digital Resonator Fiber Optic Gyro Based on A Miniature Laser Source

Huilian Ma,Xuhui Yu,Zhonghe Jin

DOI: https://doi.org/10.1117/12.913956

2012-01-01

Abstract:A resonator fiber optic gyro (RFOG) based on a fiber-coupled semiconductor DFB-LD with an FPGA-based digital processor is set up. A bias stability of 23deg/h over one hour is successfully demonstrated. This is the best result in long time stability reported to date, to the best of our knowledge, for the RFOG based on a miniaturized laser source.
Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Shuang Liu,Junyi Hu,Yuxin Wang,Hewei Wang,Lu Liu,Huilian Ma

DOI: https://doi.org/10.1109/jlt.2024.3402236

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:The broadband source-driven resonant fiber-optic gyroscope (RFOG), as a new type of gyroscope, demonstrates impressive advantages in both detection sensitivity and long-term bias stability. To further improve the system performance, this paper investigates the factors affecting the detection sensitivity and long-term bias stability of the broadband source-driven RFOG. Two mathematical models are developed to analyze the relationship between the fiber-optic ring resonator (FRR) parameters and the detection sensitivity, as well as the error induced by imperfect modulation signals. The analysis shows that the detection sensitivity can be improved by optimizing the coupling coefficients of the FRR. Meanwhile, the bias error at the output of the gyroscope caused by imperfect modulation can be effectively suppressed by improving the harmonic suppression ratio of the modulation signal and compensating the phase difference between the first and second harmonics. Finally, after using the optimized FRR and suppressing the error due to imperfect modulation, the experimental results show that the bias stability is in the range of 1°/h to 450μ°/h for different cavity lengths.
Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Linglan Wang,Yuchao Yan,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1364/ao.55.003274

IF: 1.9

2016-01-01

Applied Optics

Abstract:New developments are made in the resonant fiber optic gyro (RFOG), which is an optical sensor for the measurement of rotation rate. The digital signal processing system based on the phase modulation technique is capable of detecting the weak frequency difference induced by the Sagnac effect and suppressing the reciprocal noise in the circuit, which determines the detection sensitivity of the RFOG. A new technique based on the sinusoidal wave modulation and square wave demodulation is implemented, and the demodulation curve of the system is simulated and measured. Compared with the past technique using sinusoidal modulation and demodulation, it increases the slope of the demodulation curve by a factor of 1.56, improves the spectrum efficiency of the modulated signal, and reduces the occupancy of the field-programmable gate array resource. On the basis of this new phase modulation technique, the loop is successfully locked and achieves a short-term bias stability of 1.08°/h, which is improved by a factor of 1.47.
Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

Shuangxiang Zhao,Qingwen Liu,Yuanyuan Liu,Huilian Ma,Zuyuan He

DOI: https://doi.org/10.1364/prj.443496

IF: 7.6

2021-01-01

Photonics Research

Abstract:The miniaturization of the gyroscope is critical for spacecrafts, drones, wellbore surveys, etc. The resonant fiber-optic gyroscope (RFOG) is a competitive candidate due to its potential in both miniaturization and high resolution, while its actual performance is well below expectation because of laser-induced noise and complexity. Here we report the first navigation grade RFOG with a bias instability of 0.009°/h and an angle random walk of 0.0093°/ h . The results are realized using a fiber resonator with finesse of 63 containing 100-m long fiber. Compared with the traditional RFOGs using narrow-linewidth lasers, the key feature of the proposed RFOG is that it is driven with a broadband light source. A white-light multibeam interference method is proposed to detect the Sagnac effect, representing the simplest scheme of RFOG to date. The complexity caused by multiple feedback loops and coherent noise suppression in traditional RFOG scheme is avoided. The minimal scheme and simple modulation algorithm will also promote the on-chip waveguide gyroscope.
Resonator Fiber Optic Gyro Employing a Semiconductor Laser.

Zhonghe Jin,Xuhui Yu,Huilian Ma

DOI: https://doi.org/10.1364/ao.51.002856

IF: 1.9

2012-01-01

Applied Optics

Abstract:Resonator fiber optic gyro (RFOG) based on the Sagnac effect has the potential to achieve the inertial navigation system requirement with a short sensing coil. Semiconductor laser is one of the key elements for integration and miniaturization of the RFOG. In this paper, an RFOG employing a semiconductor laser is demonstrated. The model of the laser frequency noise induced error in the RFOG is described. To attenuate the laser frequency noise induced error, active frequency stabilization is applied. An online laser frequency noise observation is built, as a powerful optimum criterion for the loop parameters. Moreover, the laser frequency noise observation method is developed as a new measurement tool. With a fast digital proportional integrator based on a single field programmable gate array applied in the active stabilization loop, the laser frequency noise is reduced to 0.021 Hz (1σ). It is equivalent to a rotation rate of 0.07°/h, and close to the shot noise limit for the RFOG. As a result, a bias stability of open-loop gyro output is 9.5°/h (1σ) for the integration time 10 s in an hour observed in the RFOG. To the best of our knowledge, this result is the best long-term stability using the miniature semiconductor laser.
Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique

Lu Liu,Shuang Liu,Junyi Hu,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1364/OE.458596

IF: 3.8

2022-01-01

Optics Express

Abstract:A resonant fiber optic gyroscope (RFOG) using a reciprocal modulation and double demodulation technique based on a single laser source is proposed and demonstrated. The effect of the residual amplitude modulation of the phase modulator is well suppressed thanks to the reciprocal modulation and demodulation. On this basis, the backscattering noise is also eliminated by the double demodulation process. The long-term bias stability of the RFOG is successfully improved to 0.2 degrees/h for a test time of 45 hours. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Triple Closed-Loop Resonant Fiber Optic Gyroscope

Junyu Tu,Hanzhao Li,Sen Ye,Huilian Ma

DOI: https://doi.org/10.1109/ICOCN.2019.8934119

2019-01-01

Abstract:To improve the reciprocity of the signal processing systems, a triple closed-loop resonant fiber optic gyroscope is proposed. Enhanced long-term and thermal bias stabilities are successfully demonstrated thanks to the reciprocal configuration.
Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Yi Lin,Hanzhao Li,Huilian Ma,Lin Ma

DOI: https://doi.org/10.1364/ao.58.007424

IF: 1.9

2019-01-01

Applied Optics

Abstract:The photonic crystal fiber (PCF) with better thermal stability and polarization-maintaining performance is applied to the resonant fiber optic gyroscope (RFOG). A hybrid fiber ring resonator is fabricated using the conventional polarization-maintaining fiber (PMF) and PCF with close mode field diameters (MFDs) to reduce MFD-mismatch-induced splicing loss. Furthermore, the temperature-dependent birefringence coefficients of the PMF and the PCF are measured to differ almost four times in absolute value and be opposite in sign. The polarization stability of the hybrid PCF-PMF ring resonator is improved by a factor of 7 compared with the PMF ring resonator with the same length of PMF. The RFOG equipped with this hybrid PCF-PMF ring resonator achieves a bias stability of 1.67°/h.
Performance of a Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Shuang Liu,Lu Liu,Junyi Hu,Hanzhao Li,Qingwen Liu,Huilian Ma,Zuyuan He

DOI: https://doi.org/10.1364/ao.460419

IF: 1.9

2022-01-01

Applied Optics

Abstract:A resonant fiber-optic gyroscope (RFOG) based on a broadband source can avoid the fundamental drawback of coherence detection processing while possessing the greater sensitivity afforded by the finesse of the fiber-optic ring resonator. In this paper, the basic operation principle is presented and demonstrated in detail, and various noise sources, as well as the temperature effect encountered in this broadband source-driven RFOG, are studied and analyzed. Then a combined modulation technique is proposed to suppress the residual backscattering noise. To further reduce the effect of temperature transience, an asymmetric fiber ring resonator is designed. In the experiment, a bias stability of 0.01°/h is successfully demonstrated with a 100 m-long fiber ring resonator of 8 cm diameter in a laboratory environment without temperature control.
Hybrid Single-Polarization Fiber Ring Resonator and Implications for Resonant Fiber Optic Gyro

Yuchao Yan,Linglan Wang,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1364/acpc.2014.aw3d.3

2014-01-01

Abstract:A novel hybrid single-polarization fiber ring resonator is demonstrated for reducing the polarization error in a resonant fiber optic gyro. A bias stability below 0.7°/h with an integration time of 100 s has been carried out.
Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique

Hanzhao Li,Yi Lin,Lu Liu,Huilian Ma,Zhonghe Jin

DOI: https://doi.org/10.1364/OE.390605

IF: 3.8

2020-01-01

Optics Express

Abstract:A resonant fiber optic gyroscope (RFOG) based on the reciprocal phase modulation-demodulation technique is proposed and demonstrated. The residual amplitude modulation induced error of the phase modulator, and the effect of laser frequency noise are all suppressed thanks to the reciprocity of the proposed signal processing scheme. Compared with the past separate modulation-demodulation RFOG, the angular random walk is improved by a factor of 15 times from 0.08 degrees/root h to 0.0052 degrees/root h, and the bias stability is improved from 0.3 degrees/h to 0.06 degrees/h. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Development of the Resonant Fiber Optic Gyroscope Prototype

A Hollow-Core Photonic-Crystal Fiber-Optic Gyroscope Based on a Parallel Double-Ring Resonator.

Compact Resonant Fiber-Optic Gyroscope with a Broadband Light Source

Optimizing the Broadband Source-Driven Resonant Fiber-Optic Gyroscope

Resonant Fiber Optical Gyroscope Using the Single-Mode Fiber Ring Resonator.

Navigation-grade Resonant-Fiber Optic Gyroscope with a Broadband Source

Closed-loop Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Angular Random Walk Improvement of Resonant Fiber Optic Gyroscopes

Research Progress of the Resonant Fiber Optic Gyroscope Technology

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Digital Resonator Fiber Optic Gyro Based on A Miniature Laser Source

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Navigation-grade Resonant Fiber-Optic Gyroscope Using Ultra-Simple White-Light Multibeam Interferometry

Resonator Fiber Optic Gyro Employing a Semiconductor Laser.

Resonant fiber optic gyroscope using a reciprocal modulation and double demodulation technique

Triple Closed-Loop Resonant Fiber Optic Gyroscope

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Performance of a Resonant Fiber-Optic Gyroscope Based on a Broadband Source

Hybrid Single-Polarization Fiber Ring Resonator and Implications for Resonant Fiber Optic Gyro

Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique