Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Design and fabrication of low pinch-off voltage 700V lateral 4H-SiC MESFET with thin RESURF layer

A Novel 600V Lateral RESURF 4H-SiC MESFET with Sloped Field Plate for High Power and High Frequency Applications

Design Criteria of High-Voltage Lateral RESURF JFETs on 4H-Sic

Design Methodologies and Fabrication of 4H-Sic Lateral Schottky Barrier Diode on Thin RESURF Layer

Electrical Characterization and Analysis of 4H-Sic Lateral MOSFET (LMOS) for High-Voltage Power Integrated Circuits

Design and Experimental Demonstration of 4H-SiC Lateral High-Voltage MOSFETs With Double-RESURFs Technology for Power ICs

Design Optimization and Surge Current Capability of 4H-Sic Lateral Deep P+ JBS Diode on Thin RESURF Layer

1540 V 21.8mΩ·cm2 4H-SiC lateral MOSFETs with DOUBLE RESURFs for power integration applications

Novel Designed SiC Devices for High Power and High Efficiency Systems

Normally-off trench JFET technology in 4H silicon carbide

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

Development of 4H-SiC LJFET-Based Power IC

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability

A High Performance 4H-Sic Normally-off VJFET

4H-Sic Super-Junction JFET: Design and Experimental Demonstration

Optimized JFET Regions of 4H-Sic VDMOS with Reduced On-Resistance and Improved Gate Oxide Reliability

Numerical Analysis on the 4H-Sic MESFETs with a Source Field Plate

A novel high-performance junctionless 4H-SiC trench MOSFET with improved switching characteristics

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

4H-Sic Trench Gate Lateral MOSFET with Deep-Shallow Source Trench for Improved RESURF Dose Window and Reduced Oxide Field