Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Method for preparing bragg grating by femtosecond laser and apparatus

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

Femtosecond Laser Processing of Fiber Bragg Gratings with Photo-Induced Gradient-Index Assisted Focusing

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond laser direct writing large-area fiber Bragg grating based on diaphragm shaping

Application of Fiber Lasers Based on Femtosecond Laser Inscribed Fiber Bragg Gratings

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Enhanced Bragg Resonances in Small Period Long Period Fiber Grating Fabricated with Femtosecond Laser Line by Line Technique

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Taper Embedded Phase-Shifted Fiber Bragg Grating Fabricated by Femtosecond Laser Line-by-Line Inscription

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Technology of fiber grating inscription with phase mask and IR femtosecond laser

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Mach-Zehnder Interferometer and Bragg Grating combined Fiber Device by Femtosecond Laser Inscription

A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

Bragg Gratings in All-Solid Bragg Photonic Crystal Fiber Written With Femtosecond Pulses

Novel Method for Fabricating Adjustable Apodized and Chirped Gratings by UV Light Scanning Writting Technology

Femtosecond Laser Inscribed Long-Period Gratings in All-Solid Photonic Bandgap Fibers

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser