Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Femtosecond Laser Processing of Fiber Bragg Gratings with Photo-Induced Gradient-Index Assisted Focusing

Compact Microfiber Bragg Gratings with High-Index Contrast

Suppression of the Thermal Effects in the Femtosecond Laser Processing of Fiber Bragg Gratings

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Method for preparing bragg grating by femtosecond laser and apparatus

Femtosecond laser fabrication of long period fiber gratings and applications in refractive index sensing

A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Large Refractive Index Modulation Based on a BDK-doped Step-Index PMMA Optical Fiber for Highly Reflective Bragg Grating Inscription.

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Direct writing of plane-by-plane tilted fiber Bragg gratings using a femtosecond laser.

Femtosecond pulse written fiber gratings: a new avenue to integrated fiber technology

Bragg Gratings in All-Solid Bragg Photonic Crystal Fiber Written With Femtosecond Pulses

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology