Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

High-Order-Tilted Fiber Bragg Gratings with Superposed Refractive Index Modulation

Compact Microfiber Bragg Gratings with High-Index Contrast

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

Fabrication and Characterization of Line-by-Line Inscribed Tilted Fiber Bragg Gratings Using Femtosecond Laser

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Sensing Characteristics of Tilted Long Period Fiber Gratings Inscribed by Infrared Femtosecond Laser

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

Direct writing of plane-by-plane tilted fiber Bragg gratings using a femtosecond laser.

CO2 laser-written long-period fiber grating with a high diffractive order cladding mode near the turning point

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond inscription of phase-shifted fiber Bragg gratings using defocusing and phase-mask movement

Helical Intermediate-Period Fiber Grating for Refractive Index Measurements With Low-Sensitive Temperature and Torsion Response

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Compact Long-Period Fiber Gratings With Resonance at Second-Order Diffraction

Refractive Index Sensing Based on Higher-Order Mode Reflection of A Microfiber Bragg Grating