Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Technology of fiber grating inscription with phase mask and IR femtosecond laser

Selective fiber Bragg grating inscription in multicore fiber by femtosecond laser and phase mask

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm

Femtosecond pulse written fiber gratings: a new avenue to integrated fiber technology

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

High-Efficiency Inscription of Fiber Bragg Grating Array with High-Energy Nanosecond-Pulsed Laser Talbot Interferometer

Femtosecond-pulse inscription of fiber Bragg gratings with single or multiple phase-shifts in the structure

Femtosecond inscription of chirped fiber Bragg gratings and fiber Bragg grating arrays using a single uniform phase-mask

Main Factors for Optimization of PM-FBG Inscribed by Femtosecond Laser Point-by-Point Technology

Femtosecond inscription of semi-aperiodic multi-notch fiber Bragg gratings using a phase mask

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

High-precision fiber Bragg gratings inscription by infrared femtosecond laser direct-writing method assisted with image recognition

Femtosecond inscription of phase-shifted fiber Bragg gratings using defocusing and phase-mask movement

Nanoscale morphology and thermal properties of low insertion loss fiber Bragg gratings produced using the phase mask technique and a single femtosecond laser pulse

Induced Bragg Gratings in Optical Fibers and Waveguides Using an Ultrafast Infrared Laser and a Phase Mask