Abstract:Impacts of source/drain (S/D) recess engineering on the device performance of both the gate-all-around (GAA) nanosheet (NS) field-effect transistor (FET) and FinFET have been comprehensively studied at 5 nm node technology. TCAD simulation results show that the device off-leakage, including subthreshold leakage through the channel (Isub) and punch-through leakage (IPT) in the sub-channel, is strongly related to the S/D recess process. Firstly, device electrical characteristics such as current density distributions, On/Off-state current (Ion, Ioff), subthreshold swing (SS), RC delay, and gate capacitance (Cgg) are investigated quantitatively for DC/AC performance evaluation and comparison according to S/D lateral recess depth (Lrcs) variations. For both device types, larger Lrcs will result in a shorter effective channel length (Leff), so that the Ion and Ioff simultaneously increase. At the constant Ioff, the Lrcs can be optimized to enhance the device’s drivability by ~3% and improve the device’s RC delay by ~1.5% due to a larger Cgg as a penalty. Secondly, S/D over recess depth (Hrcs) in the vertical direction severely affects the punch-through leakage in the Sub-Fin or bottom parasitic channel region. The NSFET exhibits less Ioff sensitivity provided that it can be well controlled under 12 nm since the bottom parasitic channel is still gated. Furthermore, with both Hrcs and Lrcs accounted for in the device fabrication, the NSFET still shows better control of the off-leakage in the intrinsic and bottom parasitic channel regions and ~37% leakage reduction compared with FinFETs, which would be critical to enable further scaling and the low standby power application. Finally, the S/D recess engineering strategy has been given: a certain lateral recess could be optimized to obtain the best drive current and RC delay, while the vertical over-recess should be in tight management to keep the static power dissipation as low as possible.

Investigation of Dynamic Leakage-Suppression Logic Techniques Crossing Different Technology Nodes from 180 Nm Bulk CMOS to 7 Nm FinFET Plus Process

Design of probabilistic-based Markov Random Field logic gates in 65nm CMOS technology

Low Power Adiabatic Logic Based on FinFETs

Dynamic Current Mode Logic Based Flip-Flop Design for Robust and Low-Power Security Integrated Circuits

Leakage Power Reduction Of Adiabatic Circuits Based On Finfet Devices

Leakage power reduction in flip flops by using MTCMOS and ULP switch

A Transistor-Level DFF Based on FinFET Technology for Low Power Integrated Circuits

Investigation of Source/Drain Recess Engineering and Its Impacts on FinFET and GAA Nanosheet FET at 5 Nm Node

Study on leakage power estimation and reduction methodology of CMOS circuit

Full-Chip Leakage Analysis for 65 Nm Cmos Technology and Beyond

Ultra-Low-Power and Performance-Improved Logic Circuit Using Hybrid TFET-MOSFET Standard Cells Topologies and Optimized Digital Front-End Process

Strengthened Complementary Metal-Oxide-Semiconductor Logic for Small-Band-Gap Semiconductor-Based High-Performance and Low-Power Application

Reducing the power consumption of two-dimensional logic transistors

Design and Analysis of Gate Stack Silicon-on-Insulator Nanosheet FET for Low Power Applications

Employing The Mixed Fbb/Rbb In The Design Of Finfet Logic Gates

Exploiting Ferroelectric FETs for Low-Power Non-Volatile Logic-in-memory Circuits

Simultaneous Fine-grain Sleep Transistor Placement and Sizing for Leakage Optimization

Static Power Mechanism and Low-Power Design Techniques in Nanometer CMOS Circuits

Leakage Power Optimization for Clock Network Using Dual-Vth Technology

Full-Chip Leakage Analysis In Nano-Scale Technologies: Mechanisms, Variation Sources, And Verification

Two-phase Fine-grain Sleep Transistor Insertion Technique in Leakage Critical Circuits