Abstract:In this paper, we first reconstruct a novel planar static contention-free single-phase-clocked flipflop (S2CFF) based on high-performance fin-type field-effect transistors (FinFETs) to achieve high speed and ultralow power consumption. Benefiting from better control of the conductive channel, the shorted-gate (SG-mode) FinFET flip-flop obtains a persistent reduction of 56.7% in average power consumption as well as a considerable improvement in timing performance at a typical 10% data switching activity, while the low-power (LP-mode) FinFET flip-flop promotes the power reduction to 61.8% without appreciable degradation in speed. However, through further analysis of the simulation results, we have revealed an unnecessary energy loss caused by the redundant leaps of internal nodes at the static input ‘0’, which has a noticeable negative impact on total power consumption at low data switching activity. In order to overcome this defect, a conditional precharge technique is introduced to control the charging path, and we demonstrate that the independent-gate (IG-mode) FinFET is the best option for the added control transistor. The verification results indicate that our optimization reduces the power consumption by more than 50% at low data switching activity with an acceptable area and setup time penalty compared with that of LP-mode FinFET flip-flop.

Leakage power reduction in flip flops by using MTCMOS and ULP switch

Research on low power technology based on Multi Bit Flip Flop

Low Clock Swing D Flip-Flops Design by Using Output Control and MTCMOS

Design of CMOS low-power pre-settable edge-triggered flip-flop based on multithreshold technique.

Design of Low-Power D-flip-flop Based on Multithreshold Technique

Low Voltage and Low Leakage Flip-Flops Based on Transmission Gate in Nanometer Cmos Processes

Study on leakage power estimation and reduction methodology of CMOS circuit

Investigation of Dynamic Leakage-Suppression Logic Techniques Crossing Different Technology Nodes from 180 Nm Bulk CMOS to 7 Nm FinFET Plus Process

Design of D flip-flops with low power-delay product based on FinFET

Gate Oxide and Implantation Process Co-Optimization for Low-Power MCU Applications

Dynamic Current Mode Logic Based Flip-Flop Design for Robust and Low-Power Security Integrated Circuits

Leakage power reduction for CMOS combinational circuits

Low-Voltage and Low-Power True-Single-Phase 16-Transistor Flip-Flop Design

Ultralow-power High-Speed Flip-Flop Based on Multimode FinFETs

Design of Low-Power Dynamic Ternary CMOS D Flip-Flop

Leakage Power Reduction Through Dual Vth Assignment Considering Threshold Voltage Variation

Simultaneous Fine-grain Sleep Transistor Placement and Sizing for Leakage Optimization

Evaluation of Ultra-Low Power Tunneling Field Effect Transistor Power Management Unit

A Novel Low Power Interface Circuit Design Technique for Multiple Voltage Islands Scheme.

A Low Clock Swing, Power Saving and Generic Technology Based D Flip-Flop with Single Power Supply

Leakage Power Optimization for Clock Network Using Dual-Vth Technology