Abstract:This work provides a new method to prepare crosslinkable multi-hollow micro-spheres of epoxy resin dispersible in water by incomplete phase inversion emulsification in the presence of a catalytic curing agent. The key is to add the curing agent in the vicinity of the phase inversion point at low temperature so as to control the emulsifier capability of the pre-curing oligomers at a low level, which ensures the achievement of incomplete phase inversion emulsification. Scanning electron micrographs of the spheres reveal that the particles size is mainly in the range of 1 similar to 10 mum with sub-micron cavities within the spheres. DSC is used to measure the curing behavior of the spheres. Two broad exothermic peaks around 120 and 162degreesC are found in the as-prepared particles, while the first peak shifts to higher temperature 135degreesC and the onset temperature exceeds 100degreesC in the thermally treated sample at 95degreesC for 1.5 h. This indicates that the initial step curing process under the post-treatment conditions is nearly completed. After further treated at high temperature for example 200degreesC, a glass transition temperature about 130degreesC is found, and the two peaks disappear due to a full achievement of the curing process. Extraction results show that after treated at 95 T for 1.5 h in water, the micro-sized spheres become insoluble. It is concluded that the entitled waterborne microspheres are crosslinkable and multiporous. A preliminary result demonstrates a potential application of the entitled multi-hollow spheres as opacifiers due to their intensive light scattering within the hollows.

Micro-phase saeparation in epoxy resin waterborne particles process

Micro-Phase Saeparation in Epoxy Resin Waterborne Particles During Curing Process

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems.

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Polymerization Induced Phase Separation in Poly(ether Imide)-Modified Epoxy Resin Cured with Imidazole

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Kinetics of Phase Separation at the Early Stage of Spinodal Decomposition in Epoxy Resin Modified with PEI Blends

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Morphology Evolution During the Phase Separation of Polyetherimide/Epoxy Blends

Viscoelastic Effects on the Phase Separation in Thermoplastics Modified Cyanate Ester Resin

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Studies on the phase separation of polyetherimide-modified epoxy resin, 3 - Part 1 - Morphology development of the blend during curing

Studies on the Phase Separation of Polyetherimide-Modified Epoxy Resin, 3. Morphology Development of the Blend During Curing

Study on the phase separation of thermoplastic‐modified epoxy systems by time‐resolved small‐angle laser light scattering

PHASE MORPHOLOGY CONTROL OF POLYSULFONE-MODIFIED EPOXY RESIN

Studies on the viscoelastic phase separation in epoxy resin modified with polyethersulfone

CROSSLINKABLE MICROSIZED MULTI-HOLLOW WATERBORNE SPHERES OF EPOXY RESIN PREPARED BY PHASE INVERSION EMULSIFICATION

Studies on the Phase Separation of Poly(ether imide)-Modified Epoxy Resin, 5. Phase Separation Behavior of a Quasi-Binary System