Abstract:Polysiloxanes are known to significantly enhance the toughness and thermal stability of epoxy resins. However, unsatisfactory grafting or copolymerization often occurs due to compatibility issues between the two materials, resulting in noticeable phase separation and a significant reduction in strength. In this paper, the copolymerization extent of epoxy resin with polysiloxanes was enhanced through solution polymerization by refining the synthesis process. The investigation explored the impact of polymerization process parameters on the reaction extent, phase structure, and mechanical properties. The results of refractive index and epoxy value showed that the extent of copolymerization ceased to increase after a 3‐h reaction duration at 15°C, 25°C, and 40°C. The results of FTIR and NMR showed that the lower the reaction temperature, the higher the extent of copolymerization. The toughness and strength of the resins copolymerized at 15°C increased simultaneously, while the strength of the resins copolymerized at 40°C decreased. The SEM results showed that the higher the extent of copolymerization, the finer the size of the second phase of the resins and that controlling the size of the second phase to an average of about 600 nm is the key to the strengthening of the resins. It is found that a low temperature is more favorable for the occurrence of a copolymerization reaction between polysiloxanes and epoxy resin, and it is pointed out that the relationship between the extent of reaction, phase structure, and macroscopic properties is an important guide for the work on siloxane‐modified epoxy resins.

PHASE MORPHOLOGY CONTROL OF POLYSULFONE-MODIFIED EPOXY RESIN

Polymerization-induced phase separation in polyethersulfone modified epoxy resin systems: effect of curing reaction mechanism

Studies on Phase Morphology Control of Epoxy/PSF Blends

Polymerization-induced viscoelastic phase separation in polyethersulfone-modified epoxy systems.

Polymerization Induced Phase Separation in Poly(ether Imide)-Modified Epoxy Resin Cured with Imidazole

Study on the Polyethersulfone/bismaleimide Blends: Morphology and Rheology During Isothermal Curing

Phase Structure Control of Epoxy/polysulfone Blends — Effects of Molecular Weight of Epoxy Resins

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Rheological Behaviors and Structural Transitions in A Polyethersulfone-Modified Epoxy System During Phase Separation

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy

Viscoelastic Effects on the Phase Separation in Thermoplastics-Modified Epoxy Resin

Rheological Study of Epoxy Systems Blended with Poly(ether sulfone) of Different Molecular Weights

Cure Kinetics of an Epoxy Resin Containing Naphthyl/dicyclopentadiene Moieties and Bis‐phenoxy (3‐hydroxy) Phosphine Oxide System and Properties of Its Cured Polymer

Kinetics of Phase Separation at the Early Stage of Spinodal Decomposition in Epoxy Resin Modified with PEI Blends

Thermal properties of an epoxy cresol-formaldehyde novolac/diaminodiphenyl sulfone system modified by bismaleimide containing tetramethylbiphenyl and aromatic ether structures

Studies on the phase separation of polyetherimide-modified epoxy resin, 3 - Part 1 - Morphology development of the blend during curing

Studies on the Phase Separation of Polyetherimide-Modified Epoxy Resin, 3. Morphology Development of the Blend During Curing

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Studies on the Phase Separation of a Polyetherimide-Modified Epoxy Resin, 4. Kinetic Effect on the Phase Separation Mechanism of a Blend at Different Cure Rates

Phenyl Propyl Polysiloxane‐Modified Epoxy Resin III: The Reaction Condition, Phase Structures, and Macroproperties