Abstract:The quality factor ( Q factor) is a crucial performance parameter for resonators. In this paper, a novel release method for high-quality micro fused silica shell resonators with teeth-like tines with good surface morphology is proposed. This method is based on femtosecond laser-assisted chemical etching. First, the optimal energy range of femtosecond laser modification is obtained through mechanism analysis. Second, the optimal parameters for a straight line and arc pattern are determined by optimizing the average output power, processing speed, and processing spacing. The results demonstrate why edge breakage in rounded corners is easy under different parameters. Finally, according to these conclusions, the processing is performed on a micro fused silica shell resonator with a Q factor exceeding 6 million. In addition, subsurface damage is rare throughout the fabrication process, and the surface roughness of the released cross section reaches the nanometer level. The improved Q factor helps suppress mechanical thermal noise and reduce zero bias and zero bias drift, constituting the primary method for enhancing the performance of the resonant gyroscope.

Micro Hemispherical Resonators with Quality Factor of 1.18 Million Fabricated Via Laser Ablation

4.51 Million Quality Factor in Micro Hemispherical Resonator Fabricated from Laser Ablation and Welding

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Fabrication of Microresonators of High Q/V Ratios Using Femtosecond Laser Micromachining

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Ultrafast Laser in Fabrication of Micro Hemispherical Resonators with Quality Factor over Millions

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Monolithic Integration of a High-Quality Factor Lithium Niobate Microresonator with a Free-Standing Membrane Waveguide Using Femtosecond Laser Assisted Ion Beam Writing (FLAIBW)

Ultra-high-Q Microcavities Fabricated on Fused Silica Chips by Three-Dimensional Femtosecond Laser Microfabrication

Six million Q factor micro fused silica shell resonator with teeth-like tines released by femtosecond laser-assisted chemical etching

Wafer-Level Fabrication Process for Micro Hemispherical Resonators

Fusion Spliced Microfiber Closed-Loop Resonators

Ultra High Q Lithium Niobate Resonator at 15-Degree Three-Dimensional Euler Angle

Greater Than One Billion Q Factor for On-Chip Microresonators

Fabrication of a microresonator-fiber assembly maintaining a high-quality factor by CO2 laser welding

Microcrystalline Diamond Micromechanical Resonators with Quality Factor Limited by Thermoelastic Damping

Low loss HF band SOI wine glass bulk mode capacitive square-plate resonator

Fabrication of an Ultra-High Quality MgF2 Micro-Resonator for a Single Soliton Comb Generation.

Fabrication of high-Q lithium niobate microresonators using femtosecond laser micromachining

Design of GHz Mechanical Nanoresonator with High Q-Factor Based on Optomechanical System

Micro shell resonator with T-shape masses fabricated by improved process using whirling platform and femtosecond laser ablation