Abstract:To exploit the potential of wide-bandgap semiconductors in high-frequency applications, innovative packaging designs are developed to minimize the parasitic inductance of power modules. This study presents an integrated power module with a hybrid PCB/DBC structure, which uses top-side cooling prepackaged GaN enhancement-mode high-electron-mobility transistors. The module achieves a remarkably low parasitic inductance of 2.65 nH. However, there is relatively scarce research on the reliability of this heterostructure, particularly its sensitivity to thermomechanical stress due to the coefficients of thermal expansion mismatch among material interfaces. In this work, the thermal cycling characteristics of the integrated power module are comprehensively investigated. Electrical and thermal parameters were periodically and separately measured offline on a simplified package to monitor the health conditions and decouple possible synergy and competition effects among the failure modes from all packaging components. A thorough failure analysis was conducted using nondestructive visual inspections and scanning acoustic microscopy, complemented by destructive cross-sectional examination and scanning electron microscopy. The findings identified the delamination of the DBC upper copper layer, which exhibited a conchoidal fracture interface, as the primary factor that contributed to the failure of the power module with increased thermal resistance. Furthermore, the study dissected its initiation and propagation mechanisms. This investigation provides valuable insights for the development of more reliable low-inductance power module designs.

A Double-Sided Cooling GaN Power Module with High Thermal Performance

A Double-Sided Cooling 650V/30A GaN Power Module with Low Parasitic Inductance

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

A GaN HEMT Integrated Power Module with Silver Sintering Processes

Parasitic Capacitances Characterization of Double-Sided Cooling Power Module Based on GaN Devices

A Highly Integrated GaN Power Module with Low Parasitic Inductance and High Thermal Performance

Design and heat transfer research of GaN-based integrated module

Hybrid Double-Side Cooled Package for Multichip GaN Power Module with Optimal Current Sharing at High Switching Speed

High performance cooling system for automotive inverters

A 3-D Integrated Power Module of GaN HEMTs Based on Silver Sintering Processes

A Novel Double-sided Cooling 3L-ANPC SiC MOSFET Power Module with Interleaved Layout

Thermomechanical Stress Analysis, Characterization and Optimization for Double-Side Cooled Power Modules with Ceramic Substrate

Investigation of Vehicle-Oriented Double-Sided Cooling Power Module With BGA Technology

Design of a Novel Double Sided Cooling SiC Power Module Based on Multiple DBC-Stacked

A Gallium Nitride Intelligent Power Module Based on Bonding Wire Interconnection

Thermal cycling characterization of an integrated low-inductance GaN eHEMT power module

A Highly Integrated PCB Embedded GaN Full-Bridge Module With Ultralow Parasitic Inductance

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module

Electrothermal Comprehensive Optimization Design Considerations of GaN Power Module

Design and Transient Analysis of a 650V/150A GaN Power Modules with Integrated Bias Power and Gate-drive Circuit