Abstract:Compared with silicon and silicon carbide devices, the unique electrical and structural characteristics of gallium nitride high electron mobility transistors (GaN HEMTs) make them have different requirements for power module integration. This article proposes a novel integration scheme for the high-voltage lateral GaN HEMT dies without bonding wires. Based on the proposed integration scheme, a compact 650 V/30 A GaN power module with low parasitic parameters and high thermal performance is designed. The GaN dies are sandwiched between two ceramic substrates to improve thermal performance and ensure consistent thermal expansion coefficients. The multiple copper layer structure is used to increase wiring flexibility to reduce parasitic parameters. The design of gate and power loop layouts is discussed, and the common-mode (CM) capacitance is optimized. A comprehensive reliability evaluation is also carried out for this integration scheme. Finally, a double-sided cooling 650 V/30 A full-bridge GaN power module with 2.4 cm×1.3 cm×0.17 cm is fabricated. The thermal resistance is reduced by 30%–48% compared with the conventional single-sided cooling module. The power loop and gate loop inductances are reduced to 0.94 nH and 2 nH, respectively, and the CM capacitance is limited to 2.5 pF. The maximum dv/dt of the drain–source voltage is high as 150 V/ns with only 10% overshoot. Based on the power module, a 3.3-kW two-phase interleaved buck converter is developed. It has 820 W/in3 power density and 98.85% peak efficiency.

A Gallium Nitride Intelligent Power Module Based on Bonding Wire Interconnection

A GaN HEMT Integrated Power Module with Silver Sintering Processes

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

A Tri-Slope Gate Driving GaN DC–DC Converter with Spurious Noise Compression and Ringing Suppression for Automotive Applications

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

A 3-D Integrated Power Module of GaN HEMTs Based on Silver Sintering Processes

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

Low Parasitic-Inductance Packaging of a 650 V/150 A Half-Bridge Module Using Enhancement-Mode Gallium-Nitride High Electron Mobility Transistors

Hybrid Double-Side Cooled Package for Multichip GaN Power Module with Optimal Current Sharing at High Switching Speed

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

A Highly Integrated PCB Embedded GaN Full-Bridge Module With Ultralow Parasitic Inductance

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module

A Double-Sided Cooling 650V/30A GaN Power Module with Low Parasitic Inductance

PCB-Interposer-on-DBC Packaging of 650 V, 120 A GaN HEMTs

A 650 V, 2.1 Mohm GaN Half-bridge Power Module for 400V EV Traction Inverter Application

A Highly Integrated GaN Power Module with Low Parasitic Inductance and High Thermal Performance

A Parallel Vertical Structure (PVS) Used in Highly Integrated GaN-Based Power Modules

A Double-Sided Cooling GaN Power Module with High Thermal Performance

Design and Transient Analysis of a 650V/150A GaN Power Modules with Integrated Bias Power and Gate-drive Circuit

Performance Optimization of A 1.2kv SiC High Density Half Bridge Power Module in 3D Package