Abstract:In this paper, a modeling method based on MATLAB/Simulink for a temperature-dependent SiC MOSFET in the entire working region was proposed. Using a supplementary test circuit, the output characteristics of a device in the saturated region were extracted. Based on these characteristics, the model covered the output characteristics of the device in the whole working region. From the output curves, three main parameters essential for modeling were derived. Based on the Si lateral double-diffused MOSFET model, a temperature-dependent static model of SCT20N120 was established by adding a temperaturedependent compensation voltage source to simulate the temperature characteristics of the threshold voltage and a temperature-dependent compensation current source to compensate for the drain current error in the linear region due to the differences in structure and material between Si and SiC. In addition, based on the gate equivalent circuit, the dynamic model of the target device was established. The temperature-dependent static simulation results could simulate the actual measured values well. Furthermore, based on the comparison between the dynamic simulation results involving the device's turn-on and turn-off process losses and the actual transient state losses derived from a double-pulse test under the conditions of Vds = 300 V, Id = 15 A, Rg_exton = 18 Ω, and Rg_extoff = 12 Ω at 200 °C, the maximum error was 6.7%.

Cryogenic Modeling of MOSFET Device Based on BSIM and EKV Models

A Physics-Oriented Model of Cryogenic MOSFETs Including the Subthreshold Kink Effects

Characterization and Compact Modeling of Short Channel MOSFETs at Cryogenic Temperatures

MOSFET Characterization and Modeling at Cryogenic Temperatures

Extending Standard BSIM-BULK Model to Cryogenic Temperatures

Modelling and Kink Correction of Bulk CMOS at Liquid Helium Temperature

Compact Modeling of Quantum Transport in 55-Nm MOSFETs at Cryogenic Temperatures

Inflection Phenomenon in Cryogenic MOSFET Behavior

Physics-Based and Closed-Form Model for Cryo-CMOS Subthreshold Swing

Engineering Si-Qubit MOSFETs: A Phase-Field Modeling Approach Integrating Quantum-Electrostatics at Cryogenic Temperatures

Characterization and Modeling of 0.18μm Bulk CMOS Technology at Sub-Kelvin Temperature

Characterization and Modeling of Native MOSFETs Down to 4.2 K

Characterization and Modelling of Mosfet Operating at Cryogenic Temperature for Hybrid Superconductor-Cmos Circuits

A New Framework to MOS Device for Cryogenic Application: Linking Materials with Modeling

Modelling and kink correction of $0.18\,{{\bf \mu }}{m}$ 0.18 μ m bulk CMOS at liquid helium temperature

Cryogenic Modeling of Standard CMOS for Quantum Computing

Characterization and Modeling of 0.18μm CMOS Technology at sub-Kelvin Temperature

SPICE Modeling of Three Novel SiC MOSFETs with Integrated Junction-Barrier-Schottky Diode

BSIM3V3 MOSFET MODEL

A Temperature-Dependent SiC MOSFET Modeling Method Based on MATLAB/Simulink

Generic Cryo-CMOS Device Modeling and EDACompatible Platform for Reliable Cryogenic IC Design