Abstract:In the planar flow casting process of amorphous strips, the flow behavior of molten metal and the inclusion content in the crucible are crucial to the morphology and magnetic properties of the material. This study conducts a comparative analysis of the effects of non-immersed and immersed funnels, as well as various funnel structures, on the fluid flow and inclusion removal efficiency in the crucible by integrating numerical and physical models. The findings reveal that for the same pouring flow rate, the diameter of the liquid column in non-immersed pouring conditions is smaller than that of the funnel outlet, leading to a faster injection flow velocity. As a result, the melt in the crucible is subjected to severe impacts, accompanied by an increased possibility of slag entrapment. Conversely, immersed pouring substantially reduces the velocity of the molten metal at the funnel outlet, thereby extending the residence time in the crucible and diminishing the volume of the dead zone. Additionally, the molten metal backflows due to the negative pressure formed in the inner chamber of the funnel. The design of a trumpet-shaped funnel increases the effective volume while reducing the height of the backflow fluid, consequently reducing the velocity of the molten metal at the funnel outlet and prolonging the residence time. Compared to the conventional pouring process with the non-immersed funnel, the outlet velocity is reduced from 1.1 m/s to 0.12 m/s by adopting the immersed funnel with an inverted trapezoidal trumpet structure. This reduction results in a stable flow state, a 9.69% reduction in the dead zone volume fraction, and a 22.96% increase in average inclusion removal efficiency. These improvements demonstrate that a crucible funnel with a well-designed structure and the implementation of an immersion process can significantly improve the metallurgical effects in the planar flow casting process.

Annular electron beam crucible-free zone smelting device used in vacuum environment

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

A Device with a Controllable Internal Atmosphere, Independent from the Heating Furnace, for Sintering Metal Particles

AN INTRODUCTORY DISCUSSION ABOUT 1200 Kw EB FURNACE MELTING PROCESS

Novel fused magnesia smelting electric arc furnace

A New Kind of Crude Magnesium Extraction Process and Device

Ultra-high vacuum compatible induction-heated rod casting furnace

A simple optimized design of an electrode to conduct flash sintering at room temperature and low onset electric field

Design and Construction of a Laboratory-Scale Direct-Current Electric Arc Furnace for Metallurgical and High-Titanium Slag Smelting Studies

Electron beam machining system

Self-holding wide-temperature high-sealing performance dust removal device and process

Effect of Pouring Techniques and Funnel Structures on Crucible Metallurgy: Physical and Numerical Simulations

Multiple Preheating Processes for Suppressing Liquefaction Cracks in IN738LC Superalloy Fabricated by Electron Beam Powder Bed Fusion (EB-PBF)

Preparation of a (Ca,Sr,Ba)ZrO3 Crucible by Slip Casting for the Vacuum Induction Melting of NiTi Alloy

Manufacture and Research of the Linear-source Metal Atom Evaporation Device

Experimental Study of Macrostructure and Segregation by a Novel Electromagnetic Nozzle Swirling Flow Combined with Electromagnetic Stirring in Continuous Casting

Low temperature plasma modified catalyst device

Interaction Between CA6-MA Crucible and Molten Wrought Ni-based Superalloys

The Development of Electron Beam and Laser Hybrid Selective Melting Equipment

Closed-loop control of alternating dual-electron beams for molten pool regulation during in-situ additive manufacturing