Abstract:To promote the innovation of raw magnesium production technology, an integrated calcination and silicothermic reduction short process for magnesium production was experimentally studied on the laboratory scale in this article. The influences of the thermal decomposition temperature, silicothermic reduction temperature, pelletizing pressures and silicon ratio on the characteristics of producing the magnesium by the short process was studied. The crosslinking effect, including reactions between CO2 decomposed from dolomite and metal elements in ferrosilicon, microstructure change at thermal decomposition and silicothermic reduction stages, was analyzed and discussed. In addition, comparison of the magnesium reduction rate and production efficiency between the new short process and the traditional Pidgeon process was made. The results indicated that the decomposition and reduction temperatures have a more significant influence on the magnesium reduction process than the pelletizing pressure and silicon ratio. A decomposition temperature < 1000 °C and reduction temperature > 1100 °C was proven to be favorable for improving the magnesium reduction rate and production efficiency of the new short process. It was also found that the integrated short process for magnesium production can reach the same total reduction rate and has lower efficiency compared to the traditional process. The decrease of magnesium production efficiency in the new short process was expected to result from reduction of the contact area and hindering of diffusion between CaO·MgO molecules and Si(Fe) atoms because of the microstructure change and ferrosilicon consumption by the reactions between CO2 and metal elements in ferrosilicon. Preparing briquettes with additives of binder or ultrafine particles of raw materials was proposed and considered for further study to improve the production efficiency.

A New Kind of Crude Magnesium Extraction Process and Device

Experimental Study of Magnesium (Mg) Production by an Integrated Calcination and Silicothermic Reduction Short Process

Kinetics of extracting magnesium from prefabricated pellets by silicothermic process under flowing argon atmosphere

Preparation of high purity magnesium by vacuum gasification-directional condensation technology

Novel Efficient Reduction Route for Magnesium Production Using Silicothermic Process

Comparative evaluation of energy and resource consumption for vacuum carbothermal reduction and Pidgeon process used in magnesium production

Review on the Silicothermic Process for Primary Magnesium Production

Research status and prospects of melt refining and purification technology of magnesium alloys

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Distribution of impurities in magnesium via silicothermic reduction

Recent research and advances in extrusion forming of magnesium alloys: A review

Smelting Magnesium Metal using a Microwave Pidgeon Method

Research on Fe Removal, Regeneration Process, and Mechanical Properties of Mg Alloy AM50A

Reaction characteristics of magnesium production under argon flow by silicothermic reduction and numerical simulation of argon entrainment process

Method for processing magnesium alloy

Magnesium Production from Calcined Dolomite via the Pidgeon Process

Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale

Novel fused magnesia smelting electric arc furnace

Development of Low-cost Smelting Reduction Process Using Cupola Furnace for Efficient Use of Inferior Grade Manganese Ores and Rejects

One-step preparation of high purity magnesium by vacuum distillation technology

Development and Prospect of Ignition-proof Technique for Mg-alloy Melting Process