Abstract:Sb2S3 is one optimal top‐cell absorption material for Si‐based tandem solar cells. Traditional doping is difficult to achieve efficient heteroatom doping due to complicated defect characteristics. A codoping strategy is developed from Cl and Se doping by hydrothermal method. The synergistic roles of Cl and Se doping help to improve power conversion efficiency from 5.91% (control) to 7.15% (the highest certified value). Antimony sulfide is a promising wide bandgap light‐harvesting material owing to its high absorption coefficient, nontoxicity, superior stability, and low cost. However, the reported Sb2S3 absorber suffers from complicated defect characteristics due to its quasi‐1D structure. Herein, a codoping technique from chlorine and selenium is developed in hydrothermal method to regulate the film defect properties and promote the device efficiency. The theoretical calculation and experimental results demonstrate that the Cl&Se codoping plays a synergistic role in absorber film quality improvement. Se doping could efficiently fill the intrinsic deep defect level VS and Cl is a benign n‐type dopant and favor [hk1] oriented deposition. Systematic device physical characterizations verify the codoped device superior heterojunction quality and much lower interface and bulk defect density comparing with control one. The optimal codoping device delivers a certified power conversion efficiency of 7.15% (5.9% for control one), the highest certified value in planar Sb2S3 solar cells. This study develops an effective doping strategy with multi‐element synergistic incorporation which sheds new light on high‐efficiency Sb2S3 solar cells.

Ion doping simultaneously increased the carrier density and modified the conduction type of Sb<sub>2</sub>Se<sub>3</sub> thin films towards quasi-homojunction solar cell

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Over 10% Efficient Sb2(S,Se)3 Solar Cells Enabled by CsI-Doping Strategy

Enhanced Performance of Antimony Selenide Thin Film Solar Cell Using PbI2 As a Dopant

Enhanced performance of antimony selenide thin film solar cell using PbI 2 as a dopant

Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

Fundamental Physical Characterization of Sb2Se3-Based Quasi-Homojunction Thin Film Solar Cells

p‐Type Antimony Selenide via Lead Doping

Homogroup Bi/Sb Lattice Substitution to Enhance the Photoelectric Properties of Sb2Se3 Crystals

Homogroup Bi/Sb Lattice Substitution to Enhance the Photoelectric Properties of Sb<sub>2</sub>Se<sub>3</sub> Crystals

K + -Doping Constructs High-Quality Inorganic Sb2(S,Se)3 Semiconductor Film for Efficient Solar Cells with Inspiring Open-Circuit Voltage

A Codoping Strategy for Efficient Planar Heterojunction Sb2S3 Solar Cells

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

An effective engineering with simultaneous carrier density enhancement and interface optimization enables efficient Sb2Se3 solar cells

Extrinsic Dopants in Quasi-One-dimensional Photovoltaic Semiconductor Sb2S3: A First-Principles Study

Regulating the P-N Interface Quality for Sb2Se3-based Quasi-Homojunction Thin Film Solar Cells by an Effective Two-Step Heat Treatment Process

Interfacial Engineering Towards Enhanced Photovoltaic Performance of Sb2Se3 Solar Cell

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Sb Doping Strategy to Promote Growth and Suppress Defects in Solution-Processed CZTSSe Solar Cells for Improved Optoelectronic Performance

Alkali Metals Doping for High-Performance Planar Heterojunction Sb2S3 Solar Cells