Abstract:Sb2S3 is one optimal top‐cell absorption material for Si‐based tandem solar cells. Traditional doping is difficult to achieve efficient heteroatom doping due to complicated defect characteristics. A codoping strategy is developed from Cl and Se doping by hydrothermal method. The synergistic roles of Cl and Se doping help to improve power conversion efficiency from 5.91% (control) to 7.15% (the highest certified value). Antimony sulfide is a promising wide bandgap light‐harvesting material owing to its high absorption coefficient, nontoxicity, superior stability, and low cost. However, the reported Sb2S3 absorber suffers from complicated defect characteristics due to its quasi‐1D structure. Herein, a codoping technique from chlorine and selenium is developed in hydrothermal method to regulate the film defect properties and promote the device efficiency. The theoretical calculation and experimental results demonstrate that the Cl&Se codoping plays a synergistic role in absorber film quality improvement. Se doping could efficiently fill the intrinsic deep defect level VS and Cl is a benign n‐type dopant and favor [hk1] oriented deposition. Systematic device physical characterizations verify the codoped device superior heterojunction quality and much lower interface and bulk defect density comparing with control one. The optimal codoping device delivers a certified power conversion efficiency of 7.15% (5.9% for control one), the highest certified value in planar Sb2S3 solar cells. This study develops an effective doping strategy with multi‐element synergistic incorporation which sheds new light on high‐efficiency Sb2S3 solar cells.

Enhanced performance of antimony selenide thin film solar cell using PbI 2 as a dopant

Enhanced Performance of Antimony Selenide Thin Film Solar Cell Using PbI2 As a Dopant

p‐Type Antimony Selenide via Lead Doping

Over 10% Efficient Sb2(S,Se)3 Solar Cells Enabled by CsI-Doping Strategy

Ion doping simultaneously increased the carrier density and modified the conduction type of Sb<sub>2</sub>Se<sub>3</sub> thin films towards quasi-homojunction solar cell

Heterojunction Lithiation Engineering and Diffusion-Induced Defect Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Effective Dopants Pb and Pb‐SiW12 to Enhance Sb2S3‐based Photodetector Performance

Tellurium Doping Inducing Defect Passivation for Highly Effective Antimony Selenide Thin Film Solar Cell

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin‐Film Solar Cell

A Codoping Strategy for Efficient Planar Heterojunction Sb2S3 Solar Cells

Oxygen‐Assisted Tailoring of Evaporated PbS Hole Transport Layer for Highly Efficient Antimony Sulfide Solar Cells

Homogroup Bi/Sb Lattice Substitution to Enhance the Photoelectric Properties of Sb2Se3 Crystals

K + -Doping Constructs High-Quality Inorganic Sb2(S,Se)3 Semiconductor Film for Efficient Solar Cells with Inspiring Open-Circuit Voltage

N-Type Doping and Energy States Tuning in CH3NH3Pb1–xSb2x/3I3 Perovskite Solar Cells

Enhanced Performance of the Sb2Se3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination

n-Type Doping of Sb2S3 Light-Harvesting Films Enabling High-Efficiency Planar Heterojunction Solar Cells.

Homogroup Bi/Sb Lattice Substitution to Enhance the Photoelectric Properties of Sb<sub>2</sub>Se<sub>3</sub> Crystals

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Enhanced Performance of the Sb 2 Se 3 Thin-Film Solar Cell by Organic Molecule-Induced Crystallization and Suppression of the Interface Recombination