Columnar to Equiaxed Grain Transition of Laser Deposited Ti6Al4V Using Nano-Sized B4C Particles

Xin Meng,Jin Min,Zhonggang Sun,Wenshu Zhang,Hui Chang,Yuanfei Han

DOI: https://doi.org/10.1016/j.compositesb.2021.108667

2021-01-01

Abstract:A new laser melting deposition (LMD) method was employed for Ti6Al4V to stimulate the columnar to equiaxed transition (CET) via adding 1 wt% similar to 5 wt% nano-sized B4C particles. Results indicate that the grains were signifcantly refined from 600 mu m to 11 mu m with the increasing content of B4C; When the B4C content was 3 wt%, the B4C/Ti6Al4V composite achieved CET; TiB and TiC reinforcements were produced by in-situ reaction between the Ti6Al4V and B4C, which not only precipitated at the grain boundaries to restrict the grain growth, but also acted as nucleation sites to accelerate the non-spontaneous nucleation of beta grains to achieve fine grain strengthening. Tensile tests show that adding 3 wt% B4C particles results in a signifcantly increased yield strength (1235 MPa) and tensile strength (1310 MPa) and maintains a certain amount of ductility (2.4% elongation). And the epitaxial growth of beta grains in the underlying deposited layer and the CET mechanism with successive layer-upon-layer deposition were analyzed.