Abstract:Aluminum matrix composite have shown the great prospects in improving service performance and life of high-end equipment under harsh conditions due to lightweight and high specific strength. However, the presence of coarse Mg2Si phase with undesired morphology in Mg2Si/Al composites limits their engineering application. This study proposes a strategy of TiB2 ceramic particles regulating the morphology and size of Mg2Si to strengthen the aluminum matrix composites by incorporating dual-scale hybrid reinforcements of Mg2Si and TiB2. The TiB2 particles were introduced into the Al-15 wt pct Mg2Si composite by a master alloy method, and the influence of TiB2 particles on the morphology and size of Mg2Si, and Al grains of composites were investigated. The results demonstrate that 3 wt pct TiB2 particles can refine the primary Mg2Si from 14.6 to 10.4 μm, resulting in a more regular morphology. Additionally, the eutectic Mg2Si transforms from a long and slender Chinese character shape to a short rod shape, reducing the aspect ratio by 65.9 pct from 10.9 to 3.7. During the solidification process, TiB2 particles promote the heterogeneous nucleation of primary Mg2Si phases and impede the growth, leading to significant refinement. However, the improved morphology of eutectic Mg2Si is mainly attributed to the inhibited preferential growth due to the formation of a nanoparticle layer, with no observed heterogeneous nucleation of TiB2. Moreover, TiB2 particles significantly refine the grain size of Al from 212.7 to 70.8 μm. The addition of 3 wt pct TiB2 greatly improves the strength of the composites from 302 to 373 MPa, without losing ductility. After T6 heat treatment, Al-15 wt pct Mg2Si composites exhibit simultaneous improvement in the strength and ductility. Compared with composites without TiB2 particles (361 MPa and 32 pct), Al-15Mg2Si-3TiB2 composites have more superior strength–ductility combination of 434 MPa and 35 pct due to the significant modification of Mg2Si phase, grain refinement, and Orowan strengthening.

Microstructure evolution and enhanced mechanical properties in Al-Mn alloy reinforced by B-doped TiC particles

Optimizing Microstructure and Enhancing Mechanical Properties of Al–Si–Mg–Mn–based Alloy by Novel C-doped TiB2 Particles

Enhancement of the Strength-Ductility Synergy of Al-Si-Mg Alloys Via C-doped TiB2 Particles

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Strengthening behavior of B doped TiC particles on an Al–Zn–Mg alloy

Promoting Strengthening and Grain Refinement of Aluminum Alloy During Wire and Arc Additive Manufacturing by Adding TiB2 Particles

In-situ Tailoring Microstructure by Directly Synthesized TiC–TiB2 Nanoparticles to Achieve Well-Balanced Strength and Ductility in Al–Cu Alloy

Processing, Multiscale Microstructure Refinement and Mechanical Property Enhancement of Hypoeutectic Al–Si Alloys Via in Situ Bimodal-Sized TiB2 Particles

The Grain Refinement Performance of B-doped TiC on Zr-containing Al Alloys

Influence of Mn Addition on the Microstructure and Mechanical Properties of a Directionally Solidified Γ-Tial Alloy

Effects of Submicron-Sized TiC Particles on the Microstructure Modification and Mechanical Properties of Al-Si-Mg Alloy

Effect of Al-5Ti-0.25C-0.25B and Al-5Ti-1B Master Alloys on the Microstructure and Mechanical Properties of Al-9.5Si-1.5Cu-0.8Mn-0.6Mg Alloy

Versatility of trace nano-TiC–TiB2 in collaborative control of solidification-rolling-welding microstructural evolution in Al–Mg–Si alloy for enhanced properties

The effect of the TiC-TiB 2 nanoparticles on the microstructure and mechanical properties of Al-Mn-Si strips fabricated by twin-roll casting

Significant Microstructure Refinement and Improved Mechanical Properties of Mg2Si/Al Composites Induced by Nanoscale TiB2 Particles

Grain refinement of A356 alloy by Al–Ti–B–C master alloy and its effect on mechanical properties

Microstructure and Refinement Performance of Al-Ti-C Master Alloy: Effect of Excess Ti on the Growth and Nucleating Ability of TiC Particles

Microstructure and Grain Refining Performance of a New Al–Ti–C–B Master Alloy

Enhanced Strength and Ductility at Room and Elevated Temperatures of Al-Cu Alloy Matrix Composites Reinforced with Bimodal-Sized TiCp Compared with Monomodal–sized TiCp

A New Approach for Improving the Elevated-Temperature Strength and Ductility of Al–Cu–Mg–Si Alloys with Minor Amounts of Dual-Phased Submicron/nanosized TiB2–TiC Particles

The Effect of the TiC-TiB2 Nanoparticles on the Microstructure and Mechanical Properties of Al-Mn-Si Strips Fabricated by Twin-Roll Casting