Abstract:We report chemical vapor phase polymerization (VPP) deposition of poly(3,4-ethylenedioxythiophene) (PEDOT) and PEDOT/graphene on porous dielectric tantalum pentoxide (Ta2O5) surface as cathode films for solid tantalum electrolyte capacitors. The modified oxidant/oxidant-graphene films were first deposited on Ta2O5 by dip-coating, and VPP process was subsequently utilized to transfer oxidant/oxidant-graphene into PEDOT/PEDOT-graphene films. The SEM images showed PEDOT/PEDOT-graphene films was successfully constructed on porous Ta2O5 surface through VPP deposition, and a solid tantalum electrolyte capacitor with conducting polymer-graphene nano-composites as cathode films was constructed. The high conductivity nature of PEDOT-graphene leads to resistance decrease of cathode films and lower contact resistance between PEDOT/graphene and carbon paste. This nano-composite cathode films based capacitor showed ultralow equivalent series resistance (ESR) ca. 12Ω and exhibited excellent capacitance-frequency performance, which can keep 82% of initial capacitance at 500 KHz. The investigation on leakage current revealed that the device encapsulation process has no influence on capacitor leakage current, indicating the excellent mechanical strength of PEDOT/PEDOT-gaphene films. This high conductivity and mechanical strength of graphene-based polymer films shows promising future for electrode materials such as capacitors, organic solar cells and electrochemical energy storage devices.

Investigation of Conducting Poly(3,4-Ethylene Dioxy Thiophene) Film on Surface of Tantalum/Tantalum Pentoxide-Based Anode

Chemical Synthesis of Conducting Poly(3,4-Ethylenedioxythiophene) (PEDT) Film on the Surface of Anode of Solid Tantalum Electrolytic Capacitor

Preparation and Characterization of Ta_2O_5 Films Surface Modified by Electrostatic Self-assembly Ultrathin Films

Investigation of Production Process of Polymer Solid Electrolyte Tantalum Capacitor Based on High Specific Surface Area Tantalum Powder

Vapor Phase Polymerization Deposition Conducting Polymer Nanocomposites on Porous Dielectric Surface As High Performance Electrode Materials

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Tuning of Electrical and Optical Properties of Tantalum Doped TiO2 Flims Prepared by Sol-gel Method

Research on Production Process of Polymer Electrolyte Tantalum Capacitors

Influence of Electropolymerization Conditions on the Capacitance and Dissipation Factor of Polypyrrole Tantalum Electrolytic Capacitors

Novel Electrochromic Copolymers Based on Thiophene-Anthracene Derivatives Via Electrochemical Polymerization in Boron Trifluoride Diethyl Etherate

Characterization of Amorphous Ta[sub 2]o[sub 5] Film As a Novel Anode Material

Electrochromic Properties of Polymers/Copolymers Via Electrochemical Polymerization Based on Star-Shaped Thiophene Derivatives with Different Central Cores

Low Potential Electropolymerization Of Anisotropic Conductive Polythiophene Films And Fabrication Of Electrical Devices

Influence of Capability of Ta_2O_5 Dielectric Film on Performance of Wet Tantalum Electrolytic Capacitor

Influence of Conductive Polymer(PEDT) on Performance of Tantalum Electrolytic Capacitors

Preparation and characterization of lithium tantalate thin films using a high-concentration precursor solution

Research on complex film of organic conductive polymer and anatase TiO_2

Barrier Metal Properties of Amorphous Tantalum Nitride Thin Films between Platinum and Silicon deposited using Remote Plasma Metal Organic Chemical Vapor Method

Fabrication of Three-Dimensionally Ordered Macroporous Ta2O5 Films Through Aqueous Organic Gel Process

XPS analysis and electrical conduction mechanisms of atomic layer deposition grown Ta2O5 thin films onto p-Si substrates

Preparation, characterization, and photoelectric properties of poly(1,3,5-tri(thiophene-2-yl)benzene) film electrodes