Abstract:Porous crystalline/amorphous TiO2 (c/a-TiO2) hybrid films have been successfully grown on FTO substrates via a solvothermal reaction followed by a simple air annealing treatment. By adjusting reaction temperature, the porous structure and the proportion of amorphous TiO2 phase can be feasibly modulated. The in-situ transformation of crystalline TiO2 from amorphous phase could ensure the optimal crystalline/amorphous interface contact. The obtained c/a-TiO2 hybrid films shows excellent electrochromic properties which can switch between green color and transparent state with large optical contrast (59.3%) at 700 nm, high coloration efficiency (24.3 cm2 C-1) and short switching time (bleaching time of 2.0 s and coloration time of 12.1 s). Due to the desired porous structure for short Li+ ions diffusion paths and crystalline/amorphous interface enables low energy barrier and fast ion migration during the insertion/extraction of Li+ ions, the c/a-TiO2 hybrid film not only exhibits lower threshold voltage (+0.2 ∼ -1.5 V vs Ag/AgCl) and faster response than single crystalline anatase TiO2 (c-TiO2) counterpart, but also owns higher coloration efficiency and better durability than single amorphous TiO2 (a-TiO2). Compared to the commonly blue color of c-TiO2, the success to gain green color by using the prepared c/a-TiO2 hybrid film makes it very attractive for constructing electrochromic devices. Our study here also offers an alternative way of designing TiO2-based nanostructures for high-efficiency electrochromic applications.

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Blue/green-to-transmissive Electrochromic-Supercapacitor Bifunctional Polymer Films Via Electropolymerization Containing 3,4-Propylenedioxythiophene Derivatives As Novel Donor Units

A Poly(3,4-Ethylenedioxythiophene):Poly(styrene Sulfonic Acid)/titanium Oxide Nanocomposite Film Synthesized by Sol–gel Assisted Electropolymerization for Electrochromic Application

Novel Electrochromic Copolymers Based on Thiophene-Anthracene Derivatives Via Electrochemical Polymerization in Boron Trifluoride Diethyl Etherate

Enhanced electrochromic properties of anatase TiO2 for flexible electrochromic device

Building Architecture of TiO2 Nanocrystals Embedded in Amorphous WO3 Films with Improved Electrochromic Properties

In-situ polymerized poly(3-hexylthiophene) and TiO2 nanocomposites for organic solar cells

Electropolymerized Thiophene-Based Polymer with Pure Donor System Enable Magenta-to-transmissive Electrochromic-Supercapacitor Bifunctional Material

An In-Situ Synthesized Pedot:Pss/Tio2 Nanocomposite Film by Electropolymerization and Its Enhanced Electrochromic Properties

In‐situ preparation and electrochromic properties of TiO 2 / PTPA‐HTAN core‐shell nanocomposite film

A facile synthesis of porous amorphous/crystalline TiO2 hybrids for enhanced electrochromic performances

Effective process to achieve enhanced electrochromic performances based on poly(4,4',4″-tris[4-(2-bithienyl)pheny]amine)/ZnO nanorod composites

Effects of Chemical Composition, Film Thickness, and Morphology on the Electrochromic Properties of Donor-Acceptor Conjugated Copolymers Based on Diketopyrrolopyrrole

Grafting Triphenylamine Groups Onto Polysiloxanes to Improve Interaction Between the Electrochromic Films and ITO

Synthesis and electrochromic properties of all donor polymers containing fused thienothiophene derivatives with high contrast and color efficiency

Chemosynthesis, Characterizations and Electrochromic Properties of A Novel Solution-Processable Donor-Acceptor Type Copolymer

Effects Of Fluorination On The Electrochromic Performance Of Benzothiadiazole-Based Donor-Acceptor Copolymers

Synthesis and Electrochromic Properties of a Novel Conducting Polymer Film Based on Dithiafulvenyl-Triphenylamine-di(n-carbazole)

Solvothermal Synthesis of Donor-Acceptor Covalent Organic Framework/coal-Based Polyaniline Composites for Three-State Electrochromic Materials

Solution-processable Low-Bandgap 3-Fluorothieno[3,4-b]thiophene-2-carboxylate-based Conjugated Polymers for Electrochromic Applications

Electrosynthesis and characterization of a multielectrochromic copolymer of Tris[4-(2-thienyl)phenyl]amine with 3,4-ethylenedioxythiophene