Abstract:The growth characteristics of Ta2O5 thin films by atomic layer deposition (ALD) were examined using Ta(NtBu)(NEt2)3 (TBTDET) and Ta(NtBu)(NEt2)2Cp (TBDETCp) as Ta-precursors, where tBu, Et, and Cp represent tert-butyl, ethyl, and cyclopentadienyl groups, respectively, along with water vapor as oxygen source. The grown Ta2O5 films were amorphous with very smooth surface morphology for both the Ta-precursors. The saturated ALD growth rates of Ta2O5 films were 0.77 Å cycle-1 at 250 °C and 0.67 Å cycle-1 at 300 °C using TBTDET and TBDETCp precursors, respectively. The thermal decomposition of the amido ligand (NEt2) limited the ALD process temperature below 275 °C for TBTDET precursor. However, the ALD temperature window could be extended up to 325 °C due to a strong Ta-Cp bond for the TBDETCp precursor. Because of the improved thermal stability of TBDETCp precursor, excellent nonuniformity of ∼2% in 200 mm wafer could be achieved with a step coverage of ∼90% in a deep hole structure (aspect ratio 5:1) which is promising for 3-dimensional architecture to form high density memories. Nonetheless, a rather high concentration (∼7 at. %) of carbon impurities was incorporated into the Ta2O5 film using TBDETCp, which was possibly due to readsorption of dissociated ligands as small organic molecules in the growth of Ta2O5 film by ALD. Despite the presence of high carbon concentration which might be an origin of large leakage current under electric fields, the Ta2O5 film using TBDETCp showed a promising resistive switching performance with an endurance cycle as high as ∼17 500 for resistance switching random access memory application. The optical refractive index of the deposited Ta2O5 films was 2.1-2.2 at 632.8 nm using both the Ta-precursors, and indirect optical band gap was estimated to be ∼4.1 eV for both the cases.

Barrier Metal Properties of Amorphous Tantalum Nitride Thin Films between Platinum and Silicon deposited using Remote Plasma Metal Organic Chemical Vapor Method

Structural and electrical properties of tantalum nitride thin films fabricated by using reactive radio-frequency magnetron sputtering

The physical properties of cubic plasma-enhanced atomic layer deposition TaN films

A Heating and Diffusion Barrier Based on TaSiNx for Miniaturized IC Devices

Deposition of TiN and TaN by Remote Plasma ALD for Cu and Li Diffusion Barrier Applications

Atomic layer deposition of amorphous Ni-Ta-N films for Cu diffusion barrier

Growth of nanoscale Ta-Al-N diffusion barriers

Plasma‐Enhanced Atomic Layer Deposition of Amorphous Tantalum Thin Films for Copper Interconnects Using an Organometallic Precursor

Diffusion Barrier Properties of TaNx Films Prepared by Plasma Enhanced Atomic Layer Deposition from PDMAT with N2 or NH3 Plasma

Comparison of the Atomic Layer Deposition of Tantalum Oxide Thin Films Using Ta(NtBu)(NEt2)3, Ta(NtBu)(NEt2)2Cp, and H2O

Metastable Ta2N3 with Highly Tunable Electrical Conductivity Via Oxygen Incorporation

TaN Diffusion Barrier Layers Deposited by Reactive Magnetron Sputtering

Effects of nitrogen composition on the resistivity of reactively sputtered TaN thin films

Surface Characteristics and Corrosion Resistance Properties of TiNi Shape Memory Alloy Coated with Ta

XPS analysis and electrical conduction mechanisms of atomic layer deposition grown Ta2O5 thin films onto p-Si substrates

Orthogonal Experimental Optimization of Preparation and Microstructural Properties of a Diffusion Barrier for Tantalum-Based Silicide Coatings

Thermal stability and microstructure of graded α-Ta(N)/TaN bi-layer diffusion barrier

Performance of RF Sputtering Deposited TaN as the Diffusion Barrier of Cu Interconnection

Preparation and Properties Characterization of Gradient Alpha-Ta(N)/Tan Bi-Layer Diffusion Barrier

Microstructure and Thermal Diffusivity Investigations of RF-Sputtered Tantalum Nitride Films

Influence of nitrogen concentration on electrical, mechanical, and structural properties of tantalum nitride thin films prepared via DC magnetron sputtering